[PATCH v3 11/27] media: rockchip: rga: avoid odd frame sizes for YUV formats

Sven Püschel s.pueschel at pengutronix.de
Tue Jan 27 06:39:20 PST 2026


Avoid odd frame sizes for YUV formats, as they may cause undefined
behavior. This is done in preparation for the RGA3, which hangs when the
output format is set to 129x129 pixel YUV420 SP (NV12).

This requirement is documented explicitly for the RGA3 in  section 5.6.3
of the RK3588 TRM Part 2. For the RGA2 the RK3588 TRM Part 2
(section 6.1.2) and RK3568 TRM Part 2 (section 14.2) only mentions the
x/y offsets and stride aligning requirements. But the vendor driver for
the RGA2 also contains checks for the width and height to be aligned to
2 bytes.

Signed-off-by: Sven Püschel <s.pueschel at pengutronix.de>
---
 drivers/media/platform/rockchip/rga/rga.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index 21a3c6cd38dbc..4fa6adb10b7ee 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -337,6 +337,19 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
 	struct rga_ctx *ctx = file_to_rga_ctx(file);
 	const struct rga_hw *hw = ctx->rga->hw;
 	struct rga_fmt *fmt;
+	struct v4l2_frmsize_stepwise frmsize = {
+		.min_width = hw->min_width,
+		.max_width = hw->max_width,
+		.min_height = hw->min_height,
+		.max_height = hw->max_height,
+		.step_width = 1,
+		.step_height = 1,
+	};
+
+	if (v4l2_is_format_yuv(v4l2_format_info(pix_fmt->pixelformat))) {
+		frmsize.step_width = 2;
+		frmsize.step_height = 2;
+	}
 
 	if (V4L2_TYPE_IS_CAPTURE(f->type)) {
 		const struct rga_frame *frm;
@@ -358,11 +371,7 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
 	if (!fmt)
 		fmt = &hw->formats[0];
 
-	pix_fmt->width = clamp(pix_fmt->width,
-			       hw->min_width, hw->max_width);
-	pix_fmt->height = clamp(pix_fmt->height,
-				hw->min_height, hw->max_height);
-
+	v4l2_apply_frmsize_constraints(&pix_fmt->width, &pix_fmt->height, &frmsize);
 	v4l2_fill_pixfmt_mp(pix_fmt, fmt->fourcc, pix_fmt->width, pix_fmt->height);
 	pix_fmt->field = V4L2_FIELD_NONE;
 

-- 
2.52.0




More information about the linux-arm-kernel mailing list