[PATCH v3 1/5] i2c: xiic: make the clock optional

[Andrew Lunn]

On Fri, Jan 23, 2026 at 08:02:44AM +0000, Abdurrahman Hussain via B4 Relay wrote:
> From: Abdurrahman Hussain <abdurrahman at nexthop.ai>
> 
> The xiic driver is designed to operate without explicit clock configuration
> when clocks are not specified in the firmware. This functionality is
> already implemented in xiic_setclk(), which performs an early return when
> either i2c_clk or input_clk are zero:
> 
> This condition is satisfied when clocks are missing, as clk_get_rate(NULL)
> returns zero, allowing the driver to rely on hardware-configured timing.

https://elixir.bootlin.com/linux/v6.18.6/source/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml#L42

The binding indicates the clock is required. You need to update the
binding to match the code.

	Andrew