[RFC v1 11/11] arm64: dts: freescale: imx95: Add NXP neoisp device tree node

[Antoine Bouyer]

Add neoisp device tree node to imx95.dtsi and enable it by default in
19x19 evk board.

Signed-off-by: Antoine Bouyer <antoine.bouyer at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts |  4 ++++
 arch/arm64/boot/dts/freescale/imx95.dtsi          | 11 +++++++++++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index aaa0da55a22b..9fbf22a57dba 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -511,6 +511,10 @@ &mu7 {
 	status = "okay";
 };
 
+&neoisp0 {
+	status = "okay";
+};
+
 &netcmix_blk_ctrl {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index e45014d50abe..03c7f3de6e9c 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -1765,6 +1765,17 @@ smmu: iommu at 490d0000 {
 			};
 		};
 
+		neoisp0: isp at 4ae00000 {
+			compatible = "nxp,imx95-b0-neoisp";
+			reg = <0x0 0x4ae00000 0x0 0x8000>,
+			      <0x0 0x4afe0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_CAMCM0>;
+			clock-names = "camcm0";
+			power-domains = <&scmi_devpd IMX95_PD_CAMERA>;
+			status = "disabled";
+		};
+
 		usb3: usb at 4c010010 {
 			compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3";
 			reg = <0x0 0x4c010010 0x0 0x04>,
-- 
2.52.0