[PATCH] arm64: dts: ti: k3-am62l: support cpufreq

[Dhruva Gole]

Enable CPUFreq support for AM62L SoC by adding the relevant OPP efuse table
syscon to k3-am62l-wakeup.dtsi for speed grade detection.

Add the operating-points-v2 table with CPU frequency steps from 200MHz to
1.25GHz to k3-am62l3.dtsi

Configure CPU clocks to reference the SCMI clock controller for frequency
scaling

This enables proper CPU frequency scaling capabilities for the AM62L SoC
using the ARM SCMI protocol to interact with the power management firmware.

Signed-off-by: Dhruva Gole <d-gole at ti.com>
---
The driver changes were merged previously [0], and so the DT patch
is now being posted seperately. 

Logs:

root at am62lxx-evm:~# cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_available_frequencies
200000 400000 600000 800000 1000000 1250000
200000 400000 600000 800000 1000000 1250000

Changelog:
- fix the bit fiels in the OPPs as per Kendall's suggestion
- Fix the scmi_clk ID of the second A53 core

[1] https://lore.kernel.org/all/20260120-am62l-cpufreq-v3-0-8c69b80168a3@ti.com/
---
 arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi |  5 +++
 arch/arm64/boot/dts/ti/k3-am62l3.dtsi       | 47 +++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi
index 61bfcdcfc66ea8d802a36ed43cd01fbbf3decc70..a42ccd0d2fcc4d204cae81508f839c44ce83f558 100644
--- a/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62l-wakeup.dtsi
@@ -127,6 +127,11 @@ chipid: chipid at 14 {
 			bootph-all;
 		};
 
+		opp_efuse_table: syscon at 18 {
+			compatible = "ti,am62-opp-efuse-table", "syscon";
+			reg = <0x18 0x4>;
+		};
+
 		cpsw_mac_syscon: ethernet-mac-syscon at 2000 {
 			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
 			reg = <0x2000 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62l3.dtsi b/arch/arm64/boot/dts/ti/k3-am62l3.dtsi
index da220b85151227c63f59b2b8ec48ae2ebb37e7bf..26d3040ff53259daba21b39a55bb8a2ed65d4e8f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62l3.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62l3.dtsi
@@ -39,6 +39,8 @@ cpu0: cpu at 0 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&scmi_clk 356>;
 		};
 
 		cpu1: cpu at 1 {
@@ -53,6 +55,8 @@ cpu1: cpu at 1 {
 			d-cache-line-size = <64>;
 			d-cache-sets = <128>;
 			next-level-cache = <&l2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&scmi_clk 357>;
 		};
 	};
 
@@ -64,4 +68,47 @@ l2_0: l2-cache0 {
 		cache-line-size = <64>;
 		cache-sets = <256>;
 	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&opp_efuse_table>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0003>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0003>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0003>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0003>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0003>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0002>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
+		};
+	};
 };

---
base-commit: e3b32dcb9f23e3c3927ef3eec6a5842a988fb574
change-id: 20260122-am62l-dt-cpufreq-c24f0236ad15

Best regards,
-- 
Dhruva Gole <d-gole at ti.com>