[PATCH v2 1/2] dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types

[Rob Herring]

On Tue, Jan 20, 2026 at 04:13:46PM +0530, Aniket Limaye wrote:
> Update the bindings to allow setting per-line interrupt-types.
> 
> Some Interrupt Router instances can only work with a specific trigger
> type (edge or level), while others act as simple passthroughs that
> preserve the source interrupt type unchanged.
> 
> In addition to existing edge or level interrupt setting, add a third
> enum value 15 (IRQ_TYPE_DEFAULT) for "ti,intr-trigger-type" property, to
> indicate that the router acts as a passthrough. When set to 15,
> "#interrupt-cells" must be 2 to allow each interrupt source to specify
> its trigger type per-line.
> 
> Signed-off-by: Aniket Limaye <a-limaye at ti.com>
> ---
> Changes in v2:
> - Reword Commit msg to better describe the patch
> - Link to v1: https://lore.kernel.org/r/20260116-ul-driver-i2c-j722s-v1-1-c28e8ba38a9e@ti.com
> ---
>  .../bindings/interrupt-controller/ti,sci-intr.yaml | 42 +++++++++++++++++++---
>  1 file changed, 37 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
> index c99cc7323c71..59c01f327f3b 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
> @@ -15,8 +15,7 @@ allOf:
>  description: |
>    The Interrupt Router (INTR) module provides a mechanism to mux M
>    interrupt inputs to N interrupt outputs, where all M inputs are selectable
> -  to be driven per N output. An Interrupt Router can either handle edge
> -  triggered or level triggered interrupts and that is fixed in hardware.
> +  to be driven per N output.
>  
>                                     Interrupt Router
>                                 +----------------------+
> @@ -52,11 +51,12 @@ properties:
>  
>    ti,intr-trigger-type:
>      $ref: /schemas/types.yaml#/definitions/uint32
> -    enum: [1, 4]
> +    enum: [1, 4, 15]
>      description: |
>        Should be one of the following.
>          1 = If intr supports edge triggered interrupts.
>          4 = If intr supports level triggered interrupts.
> +        15 = If intr preserves the source interrupt type.

Why do you need this property in this case? #interrupt-cells == 2 means 
preserve the source type and this is redundant. Just disallow 
ti,intr-trigger-type when #interrupt-cells == 2.

Rob