[PATCH RFC v2 3/4] arm64: dts: s32: set Ethernet channel irqs

[Jan Petrous via B4 Relay]

From: "Jan Petrous (OSS)" <jan.petrous at oss.nxp.com>

The GMAC Ethernet controller found on S32G2/S32G3 and S32R45
contains up to 5 RX and 5 TX channels.
It can operate in two interrupt modes:

  1) Sharing IRQ mode: only MAC IRQ line is used
     for all channels.

  2) Multiple IRQ mode: every channel uses two IRQ lines,
     one for RX and second for TX.

Specify all IRQ twins for all channels.

Signed-off-by: Jan Petrous (OSS) <jan.petrous at oss.nxp.com>
---
 arch/arm64/boot/dts/freescale/s32g2.dtsi | 26 +++++++++++++++++++++++---
 arch/arm64/boot/dts/freescale/s32g3.dtsi | 26 +++++++++++++++++++++++---
 2 files changed, 46 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 51d00dac12de..5a553d503137 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -3,7 +3,7 @@
  * NXP S32G2 SoC family
  *
  * Copyright (c) 2021 SUSE LLC
- * Copyright 2017-2021, 2024-2025 NXP
+ * Copyright 2017-2021, 2024-2026 NXP
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -732,8 +732,28 @@ gmac0: ethernet at 4033c000 {
 			reg = <0x4033c000 0x2000>, /* gmac IP */
 			      <0x4007c004 0x4>;    /* GMAC_0_CTRL_STS */
 			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 0: tx, rx */
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 1: tx, rx */
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 2: tx, rx */
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 3: tx, rx */
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 4: tx, rx */
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq",
+					  "tx-queue-0", "rx-queue-0",
+					  "tx-queue-1", "rx-queue-1",
+					  "tx-queue-2", "rx-queue-2",
+					  "tx-queue-3", "rx-queue-3",
+					  "tx-queue-4", "rx-queue-4";
 			snps,mtl-rx-config = <&mtl_rx_setup>;
 			snps,mtl-tx-config = <&mtl_tx_setup>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
index eff7673e7f34..e1f248d3aedb 100644
--- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
- * Copyright 2021-2025 NXP
+ * Copyright 2021-2026 NXP
  *
  * Authors: Ghennadi Procopciuc <ghennadi.procopciuc at nxp.com>
  *          Ciprian Costea <ciprianmarian.costea at nxp.com>
@@ -809,8 +809,28 @@ gmac0: ethernet at 4033c000 {
 			reg = <0x4033c000 0x2000>, /* gmac IP */
 			      <0x4007c004 0x4>;    /* GMAC_0_CTRL_STS */
 			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 0: tx, rx */
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 1: tx, rx */
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 2: tx, rx */
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 3: tx, rx */
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     /* CHN 4: tx, rx */
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq",
+					  "tx-queue-0", "rx-queue-0",
+					  "tx-queue-1", "rx-queue-1",
+					  "tx-queue-2", "rx-queue-2",
+					  "tx-queue-3", "rx-queue-3",
+					  "tx-queue-4", "rx-queue-4";
 			snps,mtl-rx-config = <&mtl_rx_setup>;
 			snps,mtl-tx-config = <&mtl_tx_setup>;
 			status = "disabled";

-- 
2.47.0