(subset) [PATCH v3 0/3] spi: xilinx: switch to device properties and make IRQs optional

[Mark Brown]

On Wed, Jan 21, 2026 at 09:15:02AM +0100, Michal Simek wrote:
> On 1/20/26 20:23, Mark Brown wrote:

> > [1/3] spi: dt-bindings: xilinx: make interrupts optional
> >        commit: b603500de20fbe15ee54580481c1df4212a4ec44

> Are you sure about this one based on my discussion with Rob in past?
> https://lore.kernel.org/all/20250605130331.GA2370690-robh@kernel.org/

> I don't really mind but would be good to do it in a consistent way.

My understanding was that the hardware doesn't require physically wiring
up the interrupt signal and can work in a polling only mode.  That's not
unknown for SPI controllers.  If the interrupt is actually a strong
requirement for the hardware (and especially if it is actually wired up
on this system) then we should drop these patches.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20260121/7334e01f/attachment.sig>