[PATCH net-next v8 2/3] arm64: dts: nuvoton: Add Ethernet nodes

[Andrew Lunn]

On Tue, Jan 20, 2026 at 09:34:39AM +0800, Joey Lu wrote:
> Dear Andrew,

Please don't top post.

> 
> Thanks for the clarification.
> 
> In our design, the Ethernet PHYs are located on the base boards, not on the
> MA35D1 SOM.
> 
> The SOM base board routes two RGMII interfaces from the SOM to two external
> PHYs on the carrier board.
> 
> On the MA35D1 IoT board, there is no separate SOM and carrier board - it is
> a single integrated board.
> 
> I will update the DTS accordingly so that no PHY nodes appear in .dtsi.
> 
> Thanks!
> 
> Best regards,
> 
> Joey
> 
> Andrew Lunn 於 1/19/2026 11:22 PM 寫道:
> > On Mon, Jan 19, 2026 at 03:33:40PM +0800, Joey Lu wrote:
> > > Add GMAC nodes for our MA35D1 development boards:
> > > two RGMII interfaces for SOM board, and one RGMII
> > > and one RMII interface for IoT board.
> > > 
> > > Signed-off-by: Joey Lu <a0987203069 at gmail.com>
> > > ---
> > >   .../boot/dts/nuvoton/ma35d1-iot-512m.dts      | 12 +++++
> > >   .../boot/dts/nuvoton/ma35d1-som-256m.dts      | 10 ++++
> > >   arch/arm64/boot/dts/nuvoton/ma35d1.dtsi       | 54 +++++++++++++++++++

Does ma35d1.dtsi represent the SOM?

If so, what is ma35d1-som-256m.dts ? It looks like some odd sort of
carrier board with a few serial ports and some memory? But systems
like this put the memory on the SOM, not the carrier.

As i said, i'm confused with your naming here.

   Andrew