[PATCH v2 4/9] arm64: dts: imx8mm: add wakeup-source for usb phy

[Marco Felsch]

On 26-01-19, Frank Li wrote:
> On Sun, Jan 18, 2026 at 06:29:46PM +0100, Marco Felsch wrote:
> > On 26-01-18, Marco Felsch wrote:
> > > On 26-01-17, Frank Li wrote:
> > > > From: Li Jun <jun.li at nxp.com>
> > > >
> > > > USB phy can be wakeup source to support wakeup system from USB.
> > >
> > > Was USB wakeup tested? That beeing said, marking the device as
> > > wakeup-src is fine.
> > >
> > > > Signed-off-by: Li Jun <jun.li at nxp.com>
> > > > Signed-off-by: Frank Li <Frank.Li at nxp.com>
> > >
> > > Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>
> >
> > Just noticed that this targets the base soc.dtsi. IMHO this is board
> > desicion to make and therefore belongs to the real board.dts(i) or dtso.
> >
> > Therefore please drop my r-b.
> 
> wakeup-source is captiblity of hardware. The user need use echo 1 > wakeup
> to enable it. it is SOC's feature.

I know that but still if the your system doesn't want to have the usb
exposed as wakeup-source in the first place, the board.dts(i) files are
now forced to delete this property. Therefore IMHO it's still a board
decision to make.

Regards,
  Marco


> 
> Frank
> 
> >
> > Regards,
> >   Marco
> >
> >
> > --
> > #gernperDu
> > #CallMeByMyFirstName
> >
> > Pengutronix e.K.                           |                             |
> > Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
> > 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> > Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |
> 

-- 
#gernperDu 
#CallMeByMyFirstName

Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |