[PATCH v2 0/2] Add ICSSG0 dual EMAC support for AM642 EVM

[Meghana Malladi]

This series adds device tree overlay support for enabling ICSSG0 dual EMAC
on the AM642 EVM, along with the necessary PHY driver configuration.

The overlay enables both ICSSG0 Ethernet interfaces (port0 and port1) in
dual EMAC mode and can be combined with the existing ICSSG1 overlay to
enable all four ICSSG interfaces if needed.

The series also enables the DP83TG720 PHY driver required for the
DP83TG720-IND-SPE-EVM daughter card used with the ICSSG0 interface.

Meghana Malladi (2):
  arm64: dts: ti: k3-am642-evm: Add ICSSG0 overlay for dual EMAC support
  arm64: defconfig: Enable DP83TG720 PHY driver

 arch/arm64/boot/dts/ti/Makefile               |   4 +
 .../boot/dts/ti/k3-am642-evm-icssg0.dtso      | 203 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 3 files changed, 208 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-icssg0.dtso


base-commit: 4916f2e2f3fc9aef289fcd07949301e5c29094c2
-- 
2.43.0