[PATCH v2 3/3] arm64: dts: allwinner: h6: Add TaiqiCat (TQC) A01 support
Jun Yan
jerrysteve1101 at gmail.com
Fri Feb 27 07:58:00 PST 2026
TaiqiCat (TQC) A01 is a set-top box powered by an Allwinner H6 SoC,
equipped with an AXP305 PMIC, 1GB LPDDR3 RAM, 8GB eMMC, an AP6212
WiFi/BT combo module, one 100M Ethernet port, one USB 3.0 Type-A port,
one USB 2.0 Type-A port, one Micro USB port, HDMI, SPDIF, Micro-SD, and
infrared input.
It was released by Ultrapower(UQSoft) as a blockchain-based terminal and is
now discontinued and no longer supported.
https://web.archive.org/web/20190409213228/https://tq.ultrapower.com.cn/product.html
Hardware schematics are not available at this time; however, the
dts from the vendor firmware is provided for reference [1].
Based on the PCB silkscreen marking "AZW-KT02 2.0", the ODM/OEM
can be confirmed as AZW, and the overall hardware circuit design
is highly similar to the Beelink GS1.
Tested, works:
- debug UART
- status LED
- USB 3.0 Type-A port
- USB 2.0 Type-A port
- Micro USB port (Host)
- MicroSD
- eMMC
- WiFi/Bluetooth
- HDMI video output
Does not work:
- Ethernet (requires AC200 MFD/EPHY driver)
- HDMI audio
Untested:
- SPDIF
- IR receiver
[1] https://archive.org/download/tqc-a01-stock-fw/tqc-a01-stock-fw.dts
Signed-off-by: Jun Yan <jerrysteve1101 at gmail.com>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun50i-h6-taiqicat-a01.dts | 361 ++++++++++++++++++
2 files changed, 362 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 2edfa7bf4ab3..d116864b6c2b 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-taiqicat-a01.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
new file mode 100644
index 000000000000..381479553f5f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2026 Jun Yan <jerrysteve1101 at gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+#include "sun50i-h6-gpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "TaiqiCat (TQC) A01";
+ compatible = "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ ext_osc32k: ext-osc32k-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "ext_osc32k";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "taiqicat:blue:power";
+ gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ default-state = "on";
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the DC jack */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ sound-spdif {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun50i-h6-spdif";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "ext_clock";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdca>;
+};
+
+&de {
+ status = "okay";
+};
+
+&dwc3 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <®_dcdcc>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <®_bldo2>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ bus-width = <4>;
+ disable-wp;
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_cldo3>;
+ vqmmc-supply = <®_bldo3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ status = "okay";
+
+ brcm: sdio-wifi at 1 {
+ reg = <1>;
+ compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ vmmc-supply = <®_cldo1>;
+ vqmmc-supply = <®_bldo2>;
+ cap-mmc-hw-reset;
+ non-removable;
+ mmc-hs200-1_8v;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pc-supply = <®_bldo2>;
+ vcc-pd-supply = <®_cldo1>;
+ vcc-pg-supply = <®_bldo3>;
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp805: pmic at 36 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x36>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+ vina-supply = <®_vcc5v>;
+ vinb-supply = <®_vcc5v>;
+ vinc-supply = <®_vcc5v>;
+ vind-supply = <®_vcc5v>;
+ vine-supply = <®_vcc5v>;
+ aldoin-supply = <®_vcc5v>;
+ bldoin-supply = <®_vcc5v>;
+ cldoin-supply = <®_vcc5v>;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl-led-ir-pg-pm-ts";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-ac200";
+ regulator-enable-ramp-delay = <100000>;
+ };
+
+ aldo3 {
+ /* unused */
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18-dram-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pc-emmc-efuse-hdmi";
+ };
+
+ reg_bldo3: bldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-pg-wifiio";
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33-io-pd-emmc-sd-usb-uart";
+ };
+
+ /* This regulator is connected with CLDO3 */
+ reg_cldo2: cldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-ramp-delay = <2500>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-enable-ramp-delay = <32000>;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-ramp-delay = <2500>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <960000>;
+ regulator-max-microvolt = <960000>;
+ regulator-name = "vdd-sys-hdmi-usb";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&r_ir {
+ status = "okay";
+};
+
+&r_pio {
+ /*
+ * PL0 and PL1 are used for PMIC I2C
+ * don't enable the pl-supply else
+ * it will fail at boot
+ *
+ * vcc-pl-supply = <®_aldo1>;
+ */
+ vcc-pm-supply = <®_aldo1>;
+};
+
+&rtc {
+ clocks = <&ext_osc32k>;
+};
+
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_tx_pin>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43430a1-bt";
+ clocks = <&rtc CLK_OSC32K_FANOUT>;
+ clock-names = "lpo";
+ vbat-supply = <®_cldo3>;
+ vddio-supply = <®_bldo3>;
+ device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+ shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+ max-speed = <1500000>;
+ };
+};
+
+&usb2otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb2phy {
+ usb0_vbus-supply = <®_vcc5v>;
+ usb3_vbus-supply = <®_vcc5v>;
+ status = "okay";
+};
+
+&usb3phy {
+ status = "okay";
+};
--
2.53.0
More information about the linux-arm-kernel
mailing list