[PATCH net-next v2 6/9] net: sparx5: move remaining init functions from start() to probe()

[Daniel Machon]

Move sparx5_pgid_init(), sparx5_vlan_init(), and sparx5_board_init()
from sparx5_start() to probe(). These functions do not require cleanup.

Signed-off-by: Daniel Machon <daniel.machon at microchip.com>
---
 drivers/net/ethernet/microchip/sparx5/sparx5_main.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
index a58c79a6e873..d37f34197e84 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
@@ -726,17 +726,9 @@ static int sparx5_start(struct sparx5 *sparx5)
 			 ANA_CL_FILTER_CTRL_FORCE_FCS_UPDATE_ENA,
 			 sparx5, ANA_CL_FILTER_CTRL(idx));
 
-	/* Init PGID table arbitrator */
-	sparx5_pgid_init(sparx5);
-
-	/* Setup VLANs */
-	sparx5_vlan_init(sparx5);
-
 	/* Enable queue limitation watermarks */
 	sparx5_qlim_set(sparx5);
 
-	sparx5_board_init(sparx5);
-
 	/* Start Frame DMA with fallback to register based INJ/XTR */
 	err = -ENXIO;
 	if (sparx5->fdma_irq >= 0) {
@@ -943,6 +935,10 @@ static int mchp_sparx5_probe(struct platform_device *pdev)
 		}
 	}
 
+	sparx5_pgid_init(sparx5);
+	sparx5_vlan_init(sparx5);
+	sparx5_board_init(sparx5);
+
 	err = sparx5_start(sparx5);
 	if (err) {
 		dev_err(sparx5->dev, "Start failed\n");

-- 
2.34.1