[PATCH] Revert "ARM: dts: imx: move nand related property under nand at 0"
Max Krummenacher
max.oss.09 at gmail.com
Thu Feb 26 04:47:39 PST 2026
On Wed, Feb 25, 2026 at 12:51:32PM -0500, Frank Li wrote:
> On Wed, Feb 25, 2026 at 06:40:21PM +0100, Max Krummenacher wrote:
> > On Thu, Feb 19, 2026 at 02:41:58PM -0500, Frank Li wrote:
> > > On Thu, Feb 19, 2026 at 06:06:31PM +0100, Max Krummenacher wrote:
> > > > Hi Frank
> > > >
> > > > On Thu, Feb 19, 2026 at 11:01:26AM -0500, Frank Li wrote:
> > > > > On Thu, Feb 19, 2026 at 04:11:49PM +0100, max.oss.09 at gmail.com wrote:
> > > > > > From: Max Krummenacher <max.krummenacher at toradex.com>
> > > > > >
> > > > > > This reverts commit 8124b4a4a96b57d6cc3705a9df9623c52baa047b.
> > > > > >
> > > > > > The change introduced a regression: at least Colibri iMX6ULL and
> > > > > > Colibri iMX7 no longer boot with that commit applied, while they boot
> > > > > > again after reverting it.
> > > > > >
> > > > > > Although this has only been verified on these two modules, the issue
> > > > > > is expected to affect all device trees using the gpmi-nand driver.
> > > > > >
> > > > > > [ 0.876938] Creating 5 MTD partitions on "gpmi-nand":
> > > > > > [ 0.876974] 0x000000000000-0x000000080000 : "mx7-bcb"
> > > > > > [ 0.879860] 0x000000080000-0x000000200000 : "u-boot1"
> > > > > > [ 0.884761] 0x000000200000-0x000000380000 : "u-boot2"
> > > > > > [ 0.886993] 0x000000380000-0x000000400000 : "u-boot-env"
> > > > > > [ 0.894686] 0x000000400000-0x000020000000 : "ubi"
> > > > > > [ 0.899054] gpmi-nand 33002000.nand-controller: driver registered.
> > > > > > ...
> > > > > > [ 0.960443] ubi0: default fastmap pool size: 200
> > > > > > [ 0.960476] ubi0: default fastmap WL pool size: 100
> > > > > > [ 0.960500] ubi0: attaching mtd4
> > > > > > [ 1.636355] ubi0 error: scan_peb: bad image sequence number 1588722158 in PEB 4060, expected 1574791632
> > > > > > ...
> > > > > > [ 1.649889] ubi0 error: ubi_attach_mtd_dev: failed to attach mtd4, error -22
> > > > > > [ 1.650029] UBI error: cannot attach mtd4
> > > > > > ...
> > > > > > [ 1.670262] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,253)
> > > > >
> > > > > Can you help found the real reason why not boot?
> > > > > nand at 0 is preferred format for MTD raw nand.
> > > > >
> > > > > Frank
> > > >
> > > > I guess the root cause is that the driver for gpmi-nand predates the
> > > > update of the binding rules which want the nand device described in
> > > > a child node 'nand at 0' also for nand controllers which only can
> > > > control one nand chip.
> > > >
> > > > While it is possible to update the driver in the same patch set as
> > > > changing the device tree to understand the new dtb rules, maybe even
> > > > falling back to the old definitions this likely breaks other users,
> > > > most notable U-Boot.
> > >
> > > GPMI is widely used, include i.MX8 still use GPMI. Does below patch fix
> > > boot problem?
> >
> > My concern is that the new device tree (with the nand at 0 subnode) is not
> > yet understood by other consumers of the DT sources, e.g. U‑Boot, older
> > Linux kernels (before the driver change), possibly barebox, and any
> > other consumer that relies on the kernel DT files.
>
> I understand, but we need move forward. we can keep both for transition.
>
> >
> > Updating only the Linux driver to support both the new and old bindings
> > therefore solves only part of the problem. As long as these other
> > consumers do not understand both bindings as well, we cannot safely
> > update the shared DT sources. So I think the commit needs to be reverted.
> >
> > In addition, the proposed fix in the driver is likely incomplete:
> > with the old binding there may be child nodes (i.e for partitions).
> > 'np = of_get_next_child(this->pdev->dev.of_node, NULL);' does then find
> > a node whcih is not the node that actually describes the single NAND
> > chip.
>
> I know it is incomplete, just want to check if it is the reason cause
> boot failure.
>
> >
> > An alternative approach could be to update the binding documentation
> > so that, specifically for the GPMI driver, the older binding is also
> > considered valid.
>
> Not easy to do that, I try many method to update yaml file. common nand
> flash detect node node "nand-controller".
>
> > Once the driver supports both the old and the new binding, the old
> > form could be marked as deprecated, but still allowed for compatibility.
> > This would avoid breaking existing consumers while giving us a path
> > to migrate DTs over time.
>
> Needn't revert all, just revert delete part, keep both to help migrate.
>
> anyways, I need know if of_get_next_child(this->pdev->dev.of_node, NULL);
> fix your problem.
I tested the following on Colibri iMX7.
kernel 7.0-rc1 and DTB are built from an untouched kernel at commit
7dff99b35460 ("Remove WARN_ALL_UNSEEDED_RANDOM kernel config option").
kernel 7.0-rc1 patched has the sources as above plus the changes you
propose to the gpmi-nand driver.
DTB-reverted has the sources as above plus commit 8124b4a4a96b ("ARM:
dts: imx: move nand related property under nand at 0") reverted.
DTB DTB-reverted
kernel 7.0-rc1 fail boots
kernel 7.0-rc1 patched boots boots
Regards
Max
>
> Frank
> >
> > Regards,
> > Max
> >
> > >
> > > diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> > > index 51f595fbc834e..fb126a7c4a61e 100644
> > > --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> > > +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
> > > @@ -2680,6 +2680,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
> > > {
> > > struct nand_chip *chip = &this->nand;
> > > struct mtd_info *mtd = nand_to_mtd(chip);
> > > + struct device_node *np;
> > > int ret;
> > >
> > > /* init the MTD data structures */
> > > @@ -2688,7 +2689,10 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
> > >
> > > /* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */
> > > nand_set_controller_data(chip, this);
> > > - nand_set_flash_node(chip, this->pdev->dev.of_node);
> > > + np = of_get_next_child(this->pdev->dev.of_node, NULL);
> > > + if (!np)
> > > + np = this->pdev->dev.of_node;
> > > + nand_set_flash_node(chip, np);
> > > chip->legacy.block_markbad = gpmi_block_markbad;
> > > chip->badblock_pattern = &gpmi_bbt_descr;
> > > chip->options |= NAND_NO_SUBPAGE_WRITE;
> > >
> > > Frank
> > > >
> > > >
> > > > So I don't see a quick fix other than reverting and living with the
> > > > dtb_check warning.
> > > >
> > > > Regards,
> > > > Max
> > > >
> > > > > >
> > > > > > Fixes: 8124b4a4a96b ("ARM: dts: imx: move nand related property under nand at 0")
> > > > > > Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
> > > > > >
> > > > > > ---
> > > > > >
> > > > > > arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi | 6 +-----
> > > > > > arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi | 6 +-----
> > > > > > arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 6 +-----
> > > > > > .../boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 6 +-----
> > > > > > arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi | 6 +-----
> > > > > > arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi | 6 +-----
> > > > > > arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts | 6 +-----
> > > > > > arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi | 6 +-----
> > > > > > .../boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi | 6 +-----
> > > > > > arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi | 6 +-----
> > > > > > arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi | 12 ++++--------
> > > > > > .../boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi | 12 ++++--------
> > > > > > arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi | 6 +-----
> > > > > > arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts | 6 +-----
> > > > > > arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi | 8 ++------
> > > > > > 15 files changed, 22 insertions(+), 82 deletions(-)
> > > > > >
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi
> > > > > > index f452764fae00..547fb141ec0c 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi
> > > > > > @@ -36,12 +36,8 @@ &clks {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > status = "okay";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &i2c3 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi
> > > > > > index 58ecdb87c6d4..9975b6ee433d 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-icore.dtsi
> > > > > > @@ -172,12 +172,8 @@ eth_phy: ethernet-phy at 0 {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > status = "okay";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &i2c1 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
> > > > > > index 6f3becd33a5b..aa9a442852f4 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
> > > > > > @@ -102,12 +102,8 @@ ethphy: ethernet-phy at 0 {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > status = "okay";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &i2c1 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
> > > > > > index f2140dd8525f..85e278eb2016 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
> > > > > > @@ -73,12 +73,8 @@ ethphy: ethernet-phy at 3 {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > status = "disabled";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &i2c3 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
> > > > > > index 131a3428ddb8..c93dbc595ef6 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi
> > > > > > @@ -260,14 +260,10 @@ fixed-link {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > #address-cells = <1>;
> > > > > > #size-cells = <0>;
> > > > > > status = "okay";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &i2c3 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
> > > > > > index d29adfef5fdb..57297d6521cf 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
> > > > > > @@ -252,13 +252,9 @@ etnphy: ethernet-phy at 0 {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > fsl,no-blockmark-swap;
> > > > > > status = "okay";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &i2c1 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
> > > > > > index 40d530c1dc29..2a6bb5ff808a 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-geam.dts
> > > > > > @@ -133,12 +133,8 @@ ethphy1: ethernet-phy at 1 {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > status = "okay";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &i2c1 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
> > > > > > index 776f6f78ee46..e34c8cbe36ae 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi
> > > > > > @@ -101,12 +101,8 @@ ethphy0: ethernet-phy at 0 {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > status = "disabled";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &i2c1 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi
> > > > > > index 27e4d2aec137..a3ea1b208462 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-phycore-som.dtsi
> > > > > > @@ -63,12 +63,8 @@ ethphy1: ethernet-phy at 1 {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > status = "disabled";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &i2c1 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
> > > > > > index dc53f9286ffe..1992dfb53b45 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
> > > > > > @@ -296,13 +296,9 @@ &fec2 {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > fsl,no-blockmark-swap;
> > > > > > status = "okay";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &i2c2 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi
> > > > > > index eaed2cbf0c82..ec3c1e7301f4 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi
> > > > > > @@ -160,15 +160,11 @@ &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > fsl,use-minimum-ecc;
> > > > > > + nand-on-flash-bbt;
> > > > > > + nand-ecc-mode = "hw";
> > > > > > + nand-ecc-strength = <8>;
> > > > > > + nand-ecc-step-size = <512>;
> > > > > > status = "okay";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - nand-ecc-mode = "hw";
> > > > > > - nand-ecc-strength = <8>;
> > > > > > - nand-ecc-step-size = <512>;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > /* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi
> > > > > > index 3dfd43b32055..43518bf07602 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea.dtsi
> > > > > > @@ -43,15 +43,11 @@ ethphy0: ethernet-phy at 0 {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-ecc-mode = "hw";
> > > > > > + nand-ecc-strength = <0>;
> > > > > > + nand-ecc-step-size = <0>;
> > > > > > + nand-on-flash-bbt;
> > > > > > status = "okay";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-ecc-mode = "hw";
> > > > > > - nand-ecc-strength = <0>;
> > > > > > - nand-ecc-step-size = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &iomuxc {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi
> > > > > > index fc298f57bfff..83b9de17cee2 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-myir-mys-6ulx.dtsi
> > > > > > @@ -60,12 +60,8 @@ ethphy0: ethernet-phy at 0 {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > status = "disabled";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &uart1 {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
> > > > > > index 8ec18eae98a4..2d9f495660c9 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
> > > > > > @@ -25,12 +25,8 @@ usdhc2_pwrseq: usdhc2-pwrseq {
> > > > > > &gpmi {
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > + nand-on-flash-bbt;
> > > > > > status = "okay";
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > &snvs_poweroff {
> > > > > > diff --git a/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi
> > > > > > index a41dc4edfc0d..8666dcd7fe97 100644
> > > > > > --- a/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi
> > > > > > +++ b/arch/arm/boot/dts/nxp/imx/imx7-colibri.dtsi
> > > > > > @@ -375,14 +375,10 @@ &gpio7 {
> > > > > > /* NAND on such SKUs */
> > > > > > &gpmi {
> > > > > > fsl,use-minimum-ecc;
> > > > > > + nand-ecc-mode = "hw";
> > > > > > + nand-on-flash-bbt;
> > > > > > pinctrl-names = "default";
> > > > > > pinctrl-0 = <&pinctrl_gpmi_nand>;
> > > > > > -
> > > > > > - nand at 0 {
> > > > > > - reg = <0>;
> > > > > > - nand-ecc-mode = "hw";
> > > > > > - nand-on-flash-bbt;
> > > > > > - };
> > > > > > };
> > > > > >
> > > > > > /* On-module Power I2C */
> > > > > > --
> > > > > > 2.42.0
> > > > > >
More information about the linux-arm-kernel
mailing list