[PATCH v4 0/2] Enable mdss1 Display Port for Qualcomm lemans-ride platform

[Mani Chandana Ballary Kuntumalla]

This series adds the DPTX0 and DPTX1 nodes, as a part of mdss1
on Qualcomm lemans SoC. It also enables Display Port on Qualcomm
lemans-ride platform.

---
This series is dependent on below series:
https://lore.kernel.org/all/20260128114853.2543416-1-quic_riteshk@quicinc.com/

Change in v4:
- Moved the OPP tables for DP and MDP one level up to make them common for both nodes. [Dmitry]
- Added an explanation for enabling dispcc1 in the commit message. [Dmitry]
- Removed unnecessary blank lines preceding 'reg'. [Konrad]
- Link to v3: https://lore.kernel.org/all/20260217071420.2240380-1-mkuntuma@qti.qualcomm.com/

Change in v3:
- Patchset v2 [1/3] got merged
  https://gitlab.freedesktop.org/lumag/msm/-/commit/1338e8ae4084
- Rebased on top of linux-next and picked the latest patch from the dependent series.
- Removed additional instance of opp table [Dmitry]
- Link to v2: https://lore.kernel.org/all/20251125105622.1755651-1-quic_mkuntuma@quicinc.com/

Change in v2:
- Added fixes tag for the DP driver patch [Dmitry]
- Included below patch in this series after addressing comments [Dmitry and Konrad]
  https://lore.kernel.org/all/20250925-lemans_dual-v1-1-9c371803198d@oss.qualcomm.com/
	- Removed the misleading comment: "same path used twice" [Konrad]
	- Removed unused label in 'display-controller' [Dmitry]
- Removed extra zeroes in dispcc1 node [Konrad]
- Enbaled dispcc1 by default in main dtsi file [Dmitry]
- Added EDP ref clock and updated dependency series.
- Link to v1: https://lore.kernel.org/all/20250926085956.2346179-1-quic_mkuntuma@quicinc.com/

---
Mani Chandana Ballary Kuntumalla (2):
  arm64: dts: qcom: lemans: add mdss1 display device nodes
  arm64: dts: qcom: lemans-ride: Enable mdss1 display Port

 .../boot/dts/qcom/lemans-ride-common.dtsi     |  80 ++++
 arch/arm64/boot/dts/qcom/lemans.dtsi          | 381 ++++++++++++++----
 2 files changed, 385 insertions(+), 76 deletions(-)

-- 
2.34.1