[PATCH net] net: ti: icssg-prueth: Fix ping failure after offload mode setup when link speed is not 1G

[MD Danish Anwar]

When both eth interfaces with links up are added to a bridge or hsr
interface, ping fails if the link speed is not 1Gbps (e.g., 100Mbps).

The issue is seen because when switching to offload (bridge/hsr) mode,
prueth_emac_restart() restarts the firmware and clears DRAM with
memset_io(), setting all memory to 0. This includes PORT_LINK_SPEED_OFFSET
which firmware reads for link speed. The value 0 corresponds to
FW_LINK_SPEED_1G (0x00), so for 1Gbps links the default value is correct
and ping works. For 100Mbps links, the firmware needs FW_LINK_SPEED_100M
(0x01) but gets 0 instead, causing ping to fail. The function
emac_adjust_link() is called to reconfigure, but it detects no state change
(emac->link is still 1, speed/duplex match PHY) so new_state remains false
and icssg_config_set_speed() is never called to correct the firmware speed
value.

The fix resets emac->link to 0 before calling emac_adjust_link() in
prueth_emac_common_start(). This forces new_state=true, ensuring
icssg_config_set_speed() is called to write the correct speed value to
firmware memory.

Fixes: 06feac15406f ("net: ti: icssg-prueth: Fix emac link speed handling")
Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
---
 drivers/net/ethernet/ti/icssg/icssg_prueth.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/ti/icssg/icssg_prueth.c b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
index 0939994c932f..42a881bee109 100644
--- a/drivers/net/ethernet/ti/icssg/icssg_prueth.c
+++ b/drivers/net/ethernet/ti/icssg/icssg_prueth.c
@@ -273,6 +273,14 @@ static int prueth_emac_common_start(struct prueth *prueth)
 		if (ret)
 			goto disable_class;
 
+		/* Reset link state to force reconfiguration in
+		 * emac_adjust_link(). Without this, if the link was already up
+		 * before restart, emac_adjust_link() won't detect any state
+		 * change and will skip critical configuration like writing
+		 * speed to firmware.
+		 */
+		emac->link = 0;
+
 		mutex_lock(&emac->ndev->phydev->lock);
 		emac_adjust_link(emac->ndev);
 		mutex_unlock(&emac->ndev->phydev->lock);

base-commit: 97f87e578883abe2c8bec947dbdfdc4bf624f796
-- 
2.34.1