[PATCH 3/6] arm64: dts: broadcom: bcm2712: add camera backend node pispbe

[Gregor Herburger]

The bcm2712 found in the Raspberry Pi 5 has a PiSP Image Signal
Processor back end image processor.

Add the relevant node to the devicetree.

Signed-off-by: Gregor Herburger <gregor.herburger at linutronix.de>
---
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 69bd2934b93b34fef27989f9ddcd8a860979ab5f..98cb2173137ecda89d7f7ca1456598ff27231196 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -648,6 +648,13 @@ mip1: msi-controller at 1000131000 {
 			brcm,msi-offset = <8>;
 		};
 
+		isp: isp at 1000880000  {
+		     compatible = "brcm,bcm2712-pispbe", "raspberrypi,pispbe";
+		     reg = <0x10 0x00880000 0x0 0x4000>;
+		     interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		     clocks = <&firmware_clocks 7>;
+		};
+
 		v3d: gpu at 1002000000 {
 			compatible = "brcm,2712-v3d";
 			reg = <0x10 0x02000000 0x00 0x4000>,

-- 
2.47.3