[PATCH net-next 7/8] phy: qcom-sgmii-eth: relax order of .power_on() vs .set_mode*()

[Russell King (Oracle)]

Allow any order of the .power_on() and .set_mode*() methods as per the
recent discussion. This means phy_power_on() with this SerDes will now
restore the previous setup without requiring a subsequent
phy_set_mode*() call.

Tested-by: Mohd Ayaan Anwar <mohd.anwar at oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---

Resending as netdev (and others) were missing.

 drivers/phy/qualcomm/phy-qcom-sgmii-eth.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
index 6332ff291fdf..f48faa2929a6 100644
--- a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
+++ b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
@@ -271,8 +271,17 @@ static int qcom_dwmac_sgmii_phy_calibrate(struct phy *phy)
 static int qcom_dwmac_sgmii_phy_power_on(struct phy *phy)
 {
 	struct qcom_dwmac_sgmii_phy_data *data = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare_enable(data->refclk);
+	if (ret < 0)
+		return ret;
 
-	return clk_prepare_enable(data->refclk);
+	ret = qcom_dwmac_sgmii_phy_calibrate(phy);
+	if (ret < 0)
+		clk_disable_unprepare(data->refclk);
+
+	return ret;
 }
 
 static int qcom_dwmac_sgmii_phy_power_off(struct phy *phy)
@@ -318,6 +327,9 @@ static int qcom_dwmac_sgmii_phy_set_mode(struct phy *phy, enum phy_mode mode,
 	if (submode != data->interface)
 		data->interface = submode;
 
+	if (phy->power_count == 0)
+		return 0;
+
 	return qcom_dwmac_sgmii_phy_calibrate(phy);
 }
 
-- 
2.47.3