[PATCH] arm64: dts: freescale: imx8mp-tqma8mpql-mba8mp-ras314: fix UART1 RTS/CTS muxing

[Nora Schiffer]

The pinmuxing for UART1 was mixing DCE and DTE modes, which cannot work.
Consistently use DCE mode.

This switches the RTS and CTS pins, which is fine for this board, as
UART1 is routed to a pin header.

Fixes: ddabb3ce3f90 ("arm64: dts: freescale: add TQMa8MPQL on MBa8MP-RAS314")
Signed-off-by: Nora Schiffer <nora.schiffer at ew.tq-group.com>
---
 .../boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts     | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
index b7f69c92b7748..1665a5030b993 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
@@ -848,8 +848,8 @@ pinctrl_tlv320aic3x04: tlv320aic3x04grp {
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX	0x14>,
 			   <MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x14>,
-			   <MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS	0x14>,
-			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS	0x14>;
+			   <MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS	0x14>,
+			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS	0x14>;
 	};
 
 	pinctrl_uart1_gpio: uart1gpiogrp {
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/