[PATCH v6 3/5] dt-bindings: net: nxp,s32-dwmac: Declare per-queue interrupts
Jan Petrous via B4 Relay
devnull+jan.petrous.oss.nxp.com at kernel.org
Wed Feb 25 01:20:35 PST 2026
From: "Jan Petrous (OSS)" <jan.petrous at oss.nxp.com>
The DWMAC IP on NXP S32G/R SoCs has connected queue-based IRQ lines,
set them to allow using Multi-IRQ mode.
Reviewed-by: Matthias Brugger <mbrugger at suse.com>
Reviewed-by: Rob Herring (Arm) <robh at kernel.org>
Signed-off-by: Jan Petrous (OSS) <jan.petrous at oss.nxp.com>
---
.../devicetree/bindings/net/nxp,s32-dwmac.yaml | 44 +++++++++++++++++++---
1 file changed, 39 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml b/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
index 1b2934f3c87c..3a0e41b63c3d 100644
--- a/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-# Copyright 2021-2024 NXP
+# Copyright 2021-2026 NXP
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/nxp,s32-dwmac.yaml#
@@ -16,6 +16,8 @@ description:
the SoC S32R45 has two instances. The devices can use RGMII/RMII/MII
interface over Pinctrl device or the output can be routed
to the embedded SerDes for SGMII connectivity.
+ The DWMAC instances have connected all RX/TX queues interrupts,
+ enabling load balancing of data traffic across all CPU cores.
properties:
compatible:
@@ -45,10 +47,22 @@ properties:
FlexTimer Modules connect to GMAC_0.
interrupts:
- maxItems: 1
+ minItems: 11
+ maxItems: 11
interrupt-names:
- const: macirq
+ items:
+ - const: macirq
+ - const: tx-queue-0
+ - const: rx-queue-0
+ - const: tx-queue-1
+ - const: rx-queue-1
+ - const: tx-queue-2
+ - const: rx-queue-2
+ - const: tx-queue-3
+ - const: rx-queue-3
+ - const: tx-queue-4
+ - const: rx-queue-4
clocks:
items:
@@ -88,8 +102,28 @@ examples:
<0x0 0x4007c004 0x0 0x4>; /* GMAC_0_CTRL_STS */
nxp,phy-sel = <&gpr 0x4>;
interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ /* CHN 0: tx, rx */
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ /* CHN 1: tx, rx */
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ /* CHN 2: tx, rx */
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ /* CHN 3: tx, rx */
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ /* CHN 4: tx, rx */
+ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq",
+ "tx-queue-0", "rx-queue-0",
+ "tx-queue-1", "rx-queue-1",
+ "tx-queue-2", "rx-queue-2",
+ "tx-queue-3", "rx-queue-3",
+ "tx-queue-4", "rx-queue-4";
snps,mtl-rx-config = <&mtl_rx_setup>;
snps,mtl-tx-config = <&mtl_tx_setup>;
clocks = <&clks 24>, <&clks 17>, <&clks 16>, <&clks 15>;
--
2.47.0
More information about the linux-arm-kernel
mailing list