[PATCH net-next 3/8] net: stmmac: qcom-ethqos: convert to use phy_set_mode_ext()

[Russell King (Oracle)]

qcom-sgmii-eth now accepts the phy_set_mode*() calls to configure the
SerDes, taking a PHY interface mode rather than a speed. This allows
the elimination of the interface mode to speed conversion in
ethqos_mac_finish_serdes().

Tested-by: Mohd Ayaan Anwar <mohd.anwar at oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 23 ++++++++-----------
 1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 57cbe800f652..8913f6f02b9e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -105,7 +105,7 @@ struct qcom_ethqos {
 
 	struct clk *link_clk;
 	struct phy *serdes_phy;
-	int serdes_speed;
+	phy_interface_t serdes_mode;
 	phy_interface_t phy_mode;
 
 	const struct ethqos_emac_por *rgmii_por;
@@ -653,7 +653,8 @@ static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv)
 		return ret;
 	}
 
-	ret = phy_set_speed(ethqos->serdes_phy, ethqos->serdes_speed);
+	ret = phy_set_mode_ext(ethqos->serdes_phy, PHY_MODE_ETHERNET,
+			       ethqos->serdes_mode);
 	if (ret) {
 		phy_power_off(ethqos->serdes_phy);
 		phy_exit(ethqos->serdes_phy);
@@ -675,20 +676,16 @@ static int ethqos_mac_finish_serdes(struct net_device *ndev, void *priv,
 				    phy_interface_t interface)
 {
 	struct qcom_ethqos *ethqos = priv;
-	int speed, ret = 0;
+	int ret = 0;
 
 	qcom_ethqos_set_sgmii_loopback(ethqos, false);
 
-	speed = SPEED_UNKNOWN;
-	if (interface == PHY_INTERFACE_MODE_SGMII)
-		speed = SPEED_1000;
-	else if (interface == PHY_INTERFACE_MODE_2500BASEX)
-		speed = SPEED_2500;
-
-	if (speed != SPEED_UNKNOWN && speed != ethqos->serdes_speed) {
-		ret = phy_set_speed(ethqos->serdes_phy, speed);
+	if (interface == PHY_INTERFACE_MODE_SGMII ||
+	    interface == PHY_INTERFACE_MODE_2500BASEX) {
+		ret = phy_set_mode_ext(ethqos->serdes_phy, PHY_MODE_ETHERNET,
+				       interface);
 		if (ret == 0)
-			ethqos->serdes_speed = speed;
+			ethqos->serdes_mode = interface;
 	}
 
 	return ret;
@@ -819,7 +816,6 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(ethqos->serdes_phy),
 				     "Failed to get serdes phy\n");
 
-	ethqos->serdes_speed = SPEED_1000;
 	ethqos_set_clk_tx_rate(ethqos, NULL, plat_dat->phy_interface,
 			       SPEED_1000);
 
@@ -843,6 +839,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		plat_dat->host_dma_width = data->dma_addr_width;
 
 	if (ethqos->serdes_phy) {
+		ethqos->serdes_mode = PHY_INTERFACE_MODE_SGMII;
 		plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
 		plat_dat->serdes_powerdown  = qcom_ethqos_serdes_powerdown;
 	}
-- 
2.47.3