[PATCH v3 1/3] arm64: dts: imx93-9x9-qsb: change usdhc tuning step for eMMC and SD

[Frank Li]

On Tue, 03 Feb 2026 19:23:08 +0800, ziniu.wang_1 at nxp.com wrote:
> During system resume, the following errors occurred:
> 
>   [  430.638625] mmc1: error -84 writing Cache Enable bit
>   [  430.643618] mmc1: error -84 doing runtime resume
> 
> For eMMC and SD, there are two tuning pass windows and the gap between
> those two windows may only have one cell. If tuning step > 1, the gap may
> just be skipped and host assumes those two windows as a continuous
> windows. This will cause a wrong delay cell near the gap to be selected.
> 
> [...]

Applied, thanks!

[1/3] arm64: dts: imx93-9x9-qsb: change usdhc tuning step for eMMC and SD
      (no commit info)
[2/3] arm64: dts: imx93-11x11-evk: change usdhc tuning step for eMMC and SD
      (no commit info)
[3/3] arm64: dts: imx91-11x11-evk: change usdhc tuning step for eMMC and SD
      (no commit info)

Best regards,
--
Frank Li <Frank.Li at nxp.com>