[PATCH v2] arm64: dts: freescale: fsl-ls1028a-tqmls1028a-mbls1028a: switch mmc aliases

[Nora Schiffer]

All modern TQ-Systems boards follow the convention that mmc0 is the eMMC
and mmc1 is the SD-card when both interfaces exist, reducing differences
between boards for both documentation and U-Boot code (which uses the
same Device Trees). Adjust the recently added MBLS1028A Device Tree
accordingly.

Fixes: 0538ca1f102d ("arm64: dts: ls1028a: Add mbls1028a and mbls1028a-ind devicetrees")
Signed-off-by: Nora Schiffer <nora.schiffer at ew.tq-group.com>
Reviewed-by: Alexander Stein <alexander.stein at ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li at nxp.com>
---

v2:
- updated author information after name change
- collected review tags

As mentioned in the v1 submission, it would be great to get this in
before v7.0, as the TQMLS1028A/MBLS1028A was just added in the current
development cycle, and we'd like to avoid changing the aliases after the
DTS was part of a mainline kernel release.

Best,
Nora


 .../boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi  | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi
index cf338b2e80064..426a81e1743f1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-tqmls1028a-mbls1028a.dtsi
@@ -17,8 +17,8 @@ aliases {
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
-		mmc0 = &esdhc; /* SD-Card */
-		mmc1 = &esdhc1; /* eMMC */
+		mmc0 = &esdhc1; /* eMMC */
+		mmc1 = &esdhc; /* SD-Card */
 		serial0 = &duart0;
 		serial1 = &duart1;
 	};
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/