[PATCH 0/4] arm64: dts: Add initial support for NXP S32N79 SoC

[Ciprian Costea]

From: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>

This series introduces initial device tree support for the NXP S32N79
automotive SoC and its Reference Design Board (RDB).

The S32N79 is an automotive-grade system-on-chip featuring eight Arm
Cortex-A78AE cores organized in four dual-core clusters. It is designed
for high-performance networking and gateway applications vehicle
architectures [1]

Hardware features included in this initial support:
- 8x Arm Cortex-A78AE cores (4 clusters of 2 cores each)
- 32GB DRAM Memory. 28GB are usable and 4GB are reserved for ECC logic
- Three-level cache hierarchy (L1/L2 per core, L3 per cluster)
- GICv3 interrupt controller with ITS
- SMMUv3 for IOMMU support
- Generic Timer
- IRQ steering controller (requires separate driver patches)
- PL011 UART controllers
- uSDHC controller (requires separate driver patches)

Future patches will add support for additional peripherals such as
networking controllers, PCIe, and other IP blocks.

[1] https://www.nxp.com/products/processors-and-microcontrollers/s32-automotive-platform/s32n-vehicle-super-integration-processors:S32N

Ciprian Marian Costea (4):
  dt-bindings: interrupt-controller: fsl,irqsteer: add S32N79 support
  dt-bindings: mmc: fsl-imx-esdhc: add S32N79 support
  dt-bindings: arm: fsl: Add NXP S32N79 SoC and RDB board
  arm64: dts: freescale: Add minimal support for S32N79

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../interrupt-controller/fsl,irqsteer.yaml    |   1 +
 .../bindings/mmc/fsl-imx-esdhc.yaml           |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/s32n79-rdb.dts  |  70 ++++
 arch/arm64/boot/dts/freescale/s32n79.dtsi     | 361 ++++++++++++++++++
 6 files changed, 440 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/s32n79-rdb.dts
 create mode 100644 arch/arm64/boot/dts/freescale/s32n79.dtsi

-- 
2.43.0