[PATCH RFCv1 1/3] PCI: Allow ATS to be always on for CXL.cache capable devices

[Nicolin Chen]

On Fri, Feb 20, 2026 at 08:50:44AM -0400, Jason Gunthorpe wrote:
> On Thu, Feb 19, 2026 at 08:52:56PM -0800, Nicolin Chen wrote:
> The next suggestion is to park the device in a real DMA domain with an
> actual page table and DMA API hooked up. Now interrupts will work and
> the domain is empty so there is no translation. The issue here is the
> domain doesn't block ATS. We could fix this with some "disable ATS"
> domain flag.
> 
> In either case when the driver is bound and requests that the DMA API
> start working if the user requested IDENTITY then it has to be
> switched away from the parked domain to IDENTITY.

Thanks for elaborating. This seems very orthogonal to the issue
that driver_managed_dma skips iommu_device_use_default_domain().
(And I see you discussion with Robin.)

Regarding the empty-DMA domain, I have an idea of accommodating
ARM cases with an IOMMU_DOMAIN_MSI_ONLY, which is essentially a
paging domain that only allows IOMMU_COOKIE_DMA_MSI but blocks
everything else.

> A final thought would be to change around the driver managed DMA
> mechanism a bit to allow drivers to indicate they use IRQs but not
> DMA, then the bind step could switch from a BLOCKED domain to an empty
> DMA API domain to allow MSI to work.

Yes, "driver_managed_dma" is so unclear in pcieport case, since
its driver doesn't really manage DMA...

A separate flag could be clear. And the IOMMU layer might do an
AND operation between driver_uses_msi(?) flag and another IOMMU
device-level flag msi_behind_iommu?

Thank you
Nicolin