[PATCH v2 2/4] ARM: dts: imx6qdl: add boot phase properties

[Max Merchel]

dtschema/schemas/bootph.yaml describe various node usage during
boot phases with DT.

All SoCs require buses (aips and spba), clock, iomuxc, ipu and
SOC access during boot process.

Signed-off-by: Max Merchel <Max.Merchel at ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
index 76e6043e1f91..1fcfe0751327 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi
@@ -149,6 +149,7 @@ soc: soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&gpc>;
 		ranges;
+		bootph-all;
 
 		dma_apbh: dma-controller at 110000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
@@ -297,6 +298,7 @@ aips1: bus at 2000000 { /* AIPS1 */
 			#size-cells = <1>;
 			reg = <0x02000000 0x100000>;
 			ranges;
+			bootph-pre-ram;
 
 			spba-bus at 2000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
@@ -304,6 +306,7 @@ spba-bus at 2000000 {
 				#size-cells = <1>;
 				reg = <0x02000000 0x40000>;
 				ranges;
+				bootph-pre-ram;
 
 				spdif: spdif at 2004000 {
 					compatible = "fsl,imx35-spdif";
@@ -920,6 +923,7 @@ mux: mux-controller {
 			iomuxc: pinctrl at 20e0000 {
 				compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc";
 				reg = <0x20e0000 0x4000>;
+				bootph-pre-ram;
 			};
 
 			dcic1: dcic at 20e4000 {
@@ -950,6 +954,7 @@ aips2: bus at 2100000 { /* AIPS2 */
 			#size-cells = <1>;
 			reg = <0x02100000 0x100000>;
 			ranges;
+			bootph-pre-ram;
 
 			crypto: crypto at 2100000 {
 				compatible = "fsl,sec-v4.0";
@@ -1320,6 +1325,7 @@ ipu1: ipu at 2400000 {
 				 <&clks IMX6QDL_CLK_IPU1_DI1>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
+			bootph-all;
 
 			ipu1_csi0: port at 0 {
 				reg = <0>;
-- 
2.43.0