[PATCH v11 7/7] i2c: xiic: skip input clock setup on non-OF systems

[Abdurrahman Hussain via B4 Relay]

From: Abdurrahman Hussain <abdurrahman at nexthop.ai>

Currently Linux does not implement ACPI ClockInput() resource to describe
clocks, unlike DT. However the xiic driver is happy if something
magically enables the clock before the driver probes, and does not
turn it off again. The clock should always be considered optional for
ACPI.

Signed-off-by: Abdurrahman Hussain <abdurrahman at nexthop.ai>
---
 drivers/i2c/busses/i2c-xiic.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 2ad75325154c..e5574f2d97bf 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -1463,10 +1463,12 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
 	spin_lock_init(&i2c->atomic_lock);
 
-	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
-	if (IS_ERR(i2c->clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->clk),
-				     "failed to enable input clock.\n");
+	if (is_of_node(dev_fwnode(dev))) {
+		i2c->clk = devm_clk_get_enabled(dev, NULL);
+		if (IS_ERR(i2c->clk))
+			return dev_err_probe(dev, PTR_ERR(i2c->clk),
+					"failed to enable input clock.\n");
+	}
 
 	i2c->dev = dev;
 

-- 
2.52.0