[PATCH 6/7] dt-bindings: dmaengine: xilinx_dma: Add "xlnx,include-stscntrl-strm" property

[Srinivas Neeli]

From: Suraj Gupta <suraj.gupta2 at amd.com>

Add an optional boolean DT property "xlnx,include-stscntrl-strm" to
indicate that the AXI DMA IP is configured with the AXI4-Stream status
and control interface. This enables the use of APP fields in DMA
descriptors for metadata reporting.

This property is distinct from "xlnx,axistream-connected" and serves a
different purpose:

- "xlnx,include-stscntrl-strm": Indicates whether APP fields are present
  in DMA descriptors. When enabled, the driver can access status/control
  metadata through these descriptor fields.

- "xlnx,axistream-connected": Indicates whether a streaming IP (client)
  is connected to the DMA IP.

These two configurations are independent of each other. For example, in
TSN (Time-Sensitive Networking) designs, a streaming client may be
connected to the DMA IP, but the status/control stream interface is not
enabled. In such cases, "xlnx,axistream-connected" would be present while
"xlnx,include-stscntrl-strm" would be absent.

Adding this property allows the driver to correctly determine descriptor
layout and access APP fields only when the hardware supports them.

Signed-off-by: Suraj Gupta <suraj.gupta2 at amd.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli at amd.com>
---
 Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index cab66742e168..e72f1bb5a520 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -56,6 +56,8 @@ Optional properties for AXI DMA and MCDMA:
 	AXI stream IP.
 
 Optional properties for AXI DMA:
+- xlnx,include-stscntrl-strm: Tells hardware is configured with AXI4-stream
+	status and control interface.
 Optional properties for VDMA:
 - xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
 	It takes following values:
-- 
2.25.1