[PATCH RFC net-next 9/9] net: stmmac: qcom-ethqos: move SerDes speed configuration

[Russell King (Oracle)]

Move the SerDes speed configuration to phylink's .mac_finish() stage
so that the SerDes is appropriately configured for the interface mode
prior to the link coming up.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index cd6d1660bdb2..153f6abc77cd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -629,11 +629,6 @@ static void ethqos_configure_sgmii(struct qcom_ethqos *ethqos,
 		break;
 	}
 
-	if (interface == PHY_INTERFACE_MODE_SGMII)
-		ethqos_set_serdes_speed(ethqos, SPEED_1000);
-	else
-		ethqos_set_serdes_speed(ethqos, SPEED_2500);
-
 	ethqos_pcs_set_inband(priv, interface == PHY_INTERFACE_MODE_SGMII);
 }
 
@@ -692,6 +687,11 @@ static int ethqos_mac_finish_serdes(struct net_device *ndev, void *priv,
 
 	qcom_ethqos_set_sgmii_loopback(ethqos, false);
 
+	if (interface == PHY_INTERFACE_MODE_SGMII)
+		ethqos_set_serdes_speed(ethqos, SPEED_1000);
+	else if (interface == PHY_INTERFACE_MODE_2500BASEX)
+		ethqos_set_serdes_speed(ethqos, SPEED_2500);
+
 	return 0;
 }
 
-- 
2.47.3