[PATCH v2 4/5] arm64: dts: freescale: add initial device tree for TQMa8x

[Alexander Stein]

Am Mittwoch, 11. Februar 2026, 13:43:17 CET schrieb Marc Kleine-Budde:
> On 11.02.2026 13:34:31, Alexander Stein wrote:
> > +&flexcan1 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_flexcan1>;
> > +	xceiver-supply = <&reg_mba8x_v3v3>;
>         ^^^^^^^^^^^^^^
> > +	status = "okay";
> > +};
> > +
> > +&flexcan2 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_flexcan2>;
> > +	xceiver-supply = <&reg_mba8x_v3v3>;
>         ^^^^^^^^^^^^^^
> > +	status = "okay";
> > +};
> 
> Can you use the PHY binding instead, see:
> 
> | https://elixir.bootlin.com/linux/v6.18.6/source/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts#L180

Mh, this doesn't seem to be necessary at all. It's an allways-on fixed
regulator anyway. I guess this is carried over all the time to silence
a warning regarding dummy regulator.

Will drop in v3.

Thanks and best regards,
Alexander
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/