[PATCH v4 26/41] arm_mpam: resctrl: Add support for 'MB' resource
Shaopeng Tan (Fujitsu)
tan.shaopeng at fujitsu.com
Mon Feb 9 22:20:41 PST 2026
Hello Ben,
> From: James Morse <james.morse at arm.com>
>
> resctrl supports 'MB', as a percentage throttling of traffic from the
> L3. This is the control that mba_sc uses, so ideally the class chosen
> should be as close as possible to the counters used for mbm_total. If
> there is a single L3 and the topology of the memory matches then the
> traffic at the memory controller will be equivalent to that at egress of
> the L3. If these conditions are met allow the memory class to back MB.
>
> MB's percentage control should be backed either with the fixed point
> fraction MBW_MAX or bandwidth portion bitmaps. The bandwidth portion
> bitmaps is not used as its tricky to pick which bits to use to avoid
> contention, and may be possible to expose this as something other than a
> percentage in the future.
>
> CC: Zeng Heng <zengheng4 at huawei.com>
> Co-developed-by: Dave Martin <Dave.Martin at arm.com>
> Signed-off-by: Dave Martin <Dave.Martin at arm.com>
> Signed-off-by: James Morse <james.morse at arm.com>>
> Signed-off-by: Ben Horgan <ben.horgan at arm.com>
> ---
> Changes since v2:
> Code flow change
> Commit message 'or'
>
> Changes since v3:
> initialise tmp_cpumask
> update commit message
> check the traffic matches l3
> update comment on candidate_class update, only mbm_total
> drop tags due to rework
> ---
> drivers/resctrl/mpam_resctrl.c | 275 ++++++++++++++++++++++++++++++++-
> 1 file changed, 274 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/resctrl/mpam_resctrl.c b/drivers/resctrl/mpam_resctrl.c
> index 25950e667077..4cca3694978d 100644
> --- a/drivers/resctrl/mpam_resctrl.c
> +++ b/drivers/resctrl/mpam_resctrl.c
> @@ -253,6 +253,33 @@ static bool cache_has_usable_cpor(struct mpam_class *class)
> return class->props.cpbm_wd <= 32;
> }
>
> +static bool mba_class_use_mbw_max(struct mpam_props *cprops)
> +{
> + return (mpam_has_feature(mpam_feat_mbw_max, cprops) &&
> + cprops->bwa_wd);
> +}
> +
> +static bool class_has_usable_mba(struct mpam_props *cprops)
> +{
> + return mba_class_use_mbw_max(cprops);
> +}
> +
> +/*
> + * Calculate the worst-case percentage change from each implemented step
> + * in the control.
> + */
> +static u32 get_mba_granularity(struct mpam_props *cprops)
> +{
> + if (!mba_class_use_mbw_max(cprops))
> + return 0;
> +
> + /*
> + * bwa_wd is the number of bits implemented in the 0.xxx
> + * fixed point fraction. 1 bit is 50%, 2 is 25% etc.
> + */
> + return DIV_ROUND_UP(MAX_MBA_BW, 1 << cprops->bwa_wd);
> +}
> +
> /*
> * Each fixed-point hardware value architecturally represents a range
> * of values: the full range 0% - 100% is split contiguously into
> @@ -303,6 +330,153 @@ static u16 percent_to_mbw_max(u8 pc, struct mpam_props *cprops)
> return val;
> }
>
> +static u32 get_mba_min(struct mpam_props *cprops)
> +{
> + if (!mba_class_use_mbw_max(cprops)) {
> + WARN_ON_ONCE(1);
> + return 0;
> + }
> +
> + return mbw_max_to_percent(0, cprops);
> +}
> +
> +/* Find the L3 cache that has affinity with this CPU */
> +static int find_l3_equivalent_bitmask(int cpu, cpumask_var_t tmp_cpumask)
> +{
> + u32 cache_id = get_cpu_cacheinfo_id(cpu, 3);
> +
> + lockdep_assert_cpus_held();
> +
> + return mpam_get_cpumask_from_cache_id(cache_id, 3, tmp_cpumask);
> +}
> +
> +/*
> + * topology_matches_l3() - Is the provided class the same shape as L3
> + * @victim: The class we'd like to pretend is L3.
> + *
> + * resctrl expects all the world's a Xeon, and all counters are on the
> + * L3. We allow some mapping counters on other classes. This requires
> + * that the CPU->domain mapping is the same kind of shape.
> + *
> + * Using cacheinfo directly would make this work even if resctrl can't
> + * use the L3 - but cacheinfo can't tell us anything about offline CPUs.
> + * Using the L3 resctrl domain list also depends on CPUs being online.
> + * Using the mpam_class we picked for L3 so we can use its domain list
> + * assumes that there are MPAM controls on the L3.
> + * Instead, this path eventually uses the mpam_get_cpumask_from_cache_id()
> + * helper which can tell us about offline CPUs ... but getting the cache_id
> + * to start with relies on at least one CPU per L3 cache being online at
> + * boot.
> + *
> + * Walk the victim component list and compare the affinity mask with the
> + * corresponding L3. The topology matches if each victim:component's affinity
> + * mask is the same as the CPU's corresponding L3's. These lists/masks are
> + * computed from firmware tables so don't change at runtime.
> + */
> +static bool topology_matches_l3(struct mpam_class *victim)
> +{
> + int cpu, err;
> + struct mpam_component *victim_iter;
> + cpumask_var_t __free(free_cpumask_var) tmp_cpumask = CPUMASK_VAR_NULL;
> +
> + lockdep_assert_cpus_held();
> +
> + if (!alloc_cpumask_var(&tmp_cpumask, GFP_KERNEL))
> + return false;
> +
> + guard(srcu)(&mpam_srcu);
> + list_for_each_entry_srcu(victim_iter, &victim->components, class_list,
> + srcu_read_lock_held(&mpam_srcu)) {
> + if (cpumask_empty(&victim_iter->affinity)) {
> + pr_debug("class %u has CPU-less component %u - can't match L3!\n",
> + victim->level, victim_iter->comp_id);
> + return false;
> + }
> +
> + cpu = cpumask_any_and(&victim_iter->affinity, cpu_online_mask);
> + if (WARN_ON_ONCE(cpu >= nr_cpu_ids))
> + return false;
> +
> + cpumask_clear(tmp_cpumask);
> + err = find_l3_equivalent_bitmask(cpu, tmp_cpumask);
> + if (err) {
> + pr_debug("Failed to find L3's equivalent component to class %u component %u\n",
> + victim->level, victim_iter->comp_id);
> + return false;
> + }
> +
> + /* Any differing bits in the affinity mask? */
> + if (!cpumask_equal(tmp_cpumask, &victim_iter->affinity)) {
> + pr_debug("class %u component %u has Mismatched CPU mask with L3 equivalent\n"
> + "L3:%*pbl != victim:%*pbl\n",
> + victim->level, victim_iter->comp_id,
> + cpumask_pr_args(tmp_cpumask),
> + cpumask_pr_args(&victim_iter->affinity));
> +
> + return false;
> + }
> + }
> +
> + return true;
> +}
> +
> +/*
> + * Test if the traffic for a class matches that at egress from the L3. For
> + * MSC at memory controllers this is only possible if there is a single L3
> + * as otherwise the counters at the memory can include bandwidth from the
> + * non-local L3.
> + */
> +static bool traffic_matches_l3(struct mpam_class *class) {
An error reported by checkpatch.pl is as follows.
ERROR: open brace '{' following function definitions go on the next line
#826: FILE: drivers/resctrl/mpam_resctrl.c:826:
+static bool traffic_matches_l3(struct mpam_class *class) {
Best regards,
Shaopeng TAN
> + int err, cpu;
> + cpumask_var_t __free(free_cpumask_var) tmp_cpumask = CPUMASK_VAR_NULL;
> +
> + lockdep_assert_cpus_held();
> +
> + if (class->type == MPAM_CLASS_CACHE && class->level == 3)
> + return true;
> +
> + if (class->type == MPAM_CLASS_CACHE && class->level != 3) {
> + pr_debug("class %u is a different cache from L3\n", class->level);
> + return false;
> + }
> +
> + if (class->type != MPAM_CLASS_MEMORY) {
> + pr_debug("class %u is neither of type cache or memory\n", class->level);
> + return false;
> + }
> +
> + if (!alloc_cpumask_var(&tmp_cpumask, GFP_KERNEL)) {
> + pr_debug("cpumask allocation failed\n");
> + return false;
> + }
> +
> + if (class->type != MPAM_CLASS_MEMORY) {
> + pr_debug("class %u is neither of type cache or memory\n",
> + class->level);
> + return false;
> + }
> +
> + cpu = cpumask_any_and(&class->affinity, cpu_online_mask);
> + err = find_l3_equivalent_bitmask(cpu, tmp_cpumask);
> + if (err) {
> + pr_debug("Failed to find L3 downstream to cpu %d\n", cpu);
> + return false;
> + }
> +
> + if (!cpumask_equal(tmp_cpumask, cpu_possible_mask)) {
> + pr_debug("There is more than one L3\n");
> + return false;
> + }
> +
> + /* Be strict; the traffic might stop in the intermediate cache. */
> + if (get_cpu_cacheinfo_id(cpu, 4) != -1) {
> + pr_debug("L3 isn't the last level of cache\n");
> + return false;
> + }
> +
> + return true;
> +}
> +
> /* Test whether we can export MPAM_CLASS_CACHE:{2,3}? */
> static void mpam_resctrl_pick_caches(void)
> {
> @@ -345,9 +519,69 @@ static void mpam_resctrl_pick_caches(void)
> }
> }
>
> +static void mpam_resctrl_pick_mba(void)
> +{
> + struct mpam_class *class, *candidate_class = NULL;
> + struct mpam_resctrl_res *res;
> +
> + lockdep_assert_cpus_held();
> +
> + guard(srcu)(&mpam_srcu);
> + list_for_each_entry_srcu(class, &mpam_classes, classes_list,
> + srcu_read_lock_held(&mpam_srcu)) {
> + struct mpam_props *cprops = &class->props;
> +
> + if (class->level != 3 && class->type == MPAM_CLASS_CACHE) {
> + pr_debug("class %u is a cache but not the L3\n", class->level);
> + continue;
> + }
> +
> + if (!class_has_usable_mba(cprops)) {
> + pr_debug("class %u has no bandwidth control\n",
> + class->level);
> + continue;
> + }
> +
> + if (!cpumask_equal(&class->affinity, cpu_possible_mask)) {
> + pr_debug("class %u has missing CPUs\n", class->level);
> + continue;
> + }
> +
> + if (!topology_matches_l3(class)) {
> + pr_debug("class %u topology doesn't match L3\n",
> + class->level);
> + continue;
> + }
> +
> + if (!traffic_matches_l3(class)) {
> + pr_debug("class %u traffic doesn't match L3 egress\n",
> + class->level);
> + continue;
> + }
> +
> + /*
> + * Pick a resource to be MBA that as close as possible to
> + * the L3. mbm_total counts the bandwidth leaving the L3
> + * cache and MBA should correspond as closely as possible
> + * for proper operation of mba_sc.
> + */
> + if (!candidate_class || class->level < candidate_class->level)
> + candidate_class = class;
> + }
> +
> + if (candidate_class) {
> + pr_debug("selected class %u to back MBA\n",
> + candidate_class->level);
> + res = &mpam_resctrl_controls[RDT_RESOURCE_MBA];
> + res->class = candidate_class;
> + exposed_alloc_capable = true;
> + }
> +}
> +
> static int mpam_resctrl_control_init(struct mpam_resctrl_res *res)
> {
> struct mpam_class *class = res->class;
> + struct mpam_props *cprops = &class->props;
> struct rdt_resource *r = &res->resctrl_res;
>
> switch (r->rid) {
> @@ -377,6 +611,19 @@ static int mpam_resctrl_control_init(struct mpam_resctrl_res *res)
> */
> r->cache.shareable_bits = resctrl_get_default_ctrl(r);
> break;
> + case RDT_RESOURCE_MBA:
> + r->alloc_capable = true;
> + r->schema_fmt = RESCTRL_SCHEMA_RANGE;
> + r->ctrl_scope = RESCTRL_L3_CACHE;
> +
> + r->membw.delay_linear = true;
> + r->membw.throttle_mode = THREAD_THROTTLE_UNDEFINED;
> + r->membw.min_bw = get_mba_min(cprops);
> + r->membw.max_bw = MAX_MBA_BW;
> + r->membw.bw_gran = get_mba_granularity(cprops);
> +
> + r->name = "MB";
> + break;
> default:
> return -EINVAL;
> }
> @@ -391,7 +638,17 @@ static int mpam_resctrl_pick_domain_id(int cpu, struct mpam_component *comp)
> if (class->type == MPAM_CLASS_CACHE)
> return comp->comp_id;
>
> - /* TODO: repaint domain ids to match the L3 domain ids */
> + if (topology_matches_l3(class)) {
> + /* Use the corresponding L3 component ID as the domain ID */
> + int id = get_cpu_cacheinfo_id(cpu, 3);
> +
> + /* Implies topology_matches_l3() made a mistake */
> + if (WARN_ON_ONCE(id == -1))
> + return comp->comp_id;
> +
> + return id;
> + }
> +
> /* Otherwise, expose the ID used by the firmware table code. */
> return comp->comp_id;
> }
> @@ -431,6 +688,12 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_ctrl_domain *d,
> case RDT_RESOURCE_L3:
> configured_by = mpam_feat_cpor_part;
> break;
> + case RDT_RESOURCE_MBA:
> + if (mpam_has_feature(mpam_feat_mbw_max, cprops)) {
> + configured_by = mpam_feat_mbw_max;
> + break;
> + }
> + fallthrough;
> default:
> return resctrl_get_default_ctrl(r);
> }
> @@ -442,6 +705,8 @@ u32 resctrl_arch_get_config(struct rdt_resource *r, struct rdt_ctrl_domain *d,
> switch (configured_by) {
> case mpam_feat_cpor_part:
> return cfg->cpbm;
> + case mpam_feat_mbw_max:
> + return mbw_max_to_percent(cfg->mbw_max, cprops);
> default:
> return resctrl_get_default_ctrl(r);
> }
> @@ -486,6 +751,13 @@ int resctrl_arch_update_one(struct rdt_resource *r, struct rdt_ctrl_domain *d,
> cfg.cpbm = cfg_val;
> mpam_set_feature(mpam_feat_cpor_part, &cfg);
> break;
> + case RDT_RESOURCE_MBA:
> + if (mpam_has_feature(mpam_feat_mbw_max, cprops)) {
> + cfg.mbw_max = percent_to_mbw_max(cfg_val, cprops);
> + mpam_set_feature(mpam_feat_mbw_max, &cfg);
> + break;
> + }
> + fallthrough;
> default:
> return -EINVAL;
> }
> @@ -789,6 +1061,7 @@ int mpam_resctrl_setup(void)
>
> /* Find some classes to use for controls */
> mpam_resctrl_pick_caches();
> + mpam_resctrl_pick_mba();
>
> /* Initialise the resctrl structures from the classes */
> for_each_mpam_resctrl_control(res, rid) {
> --
> 2.43.0
>
>
>
More information about the linux-arm-kernel
mailing list