[PATCH v4 20/41] arm_mpam: resctrl: Add CDP emulation

[Fenghua Yu]

Hi, Ben,

On 2/3/26 13:43, Ben Horgan wrote:
> From: James Morse <james.morse at arm.com>
> 
> Intel RDT's CDP feature allows the cache to use a different control value
> depending on whether the accesses was for instruction fetch or a data
> access. MPAM's equivalent feature is the other way up: the CPU assigns a
> different partid label to traffic depending on whether it was instruction
> fetch or a data access, which causes the cache to use a different control
> value based solely on the partid.
> 
> MPAM can emulate CDP, with the side effect that the alternative partid is
> seen by all MSC, it can't be enabled per-MSC.
> 
> Add the resctrl hooks to turn this on or off. Add the helpers that match a
> closid against a task, which need to be aware that the value written to
> hardware is not the same as the one resctrl is using.
> 
> Update the 'arm64_mpam_global_default' variable the arch code uses during
> context switch to know when the per-cpu value should be used instead. Also,
> update these per-cpu values and sync the resulting mpam partid/pmg
> configuration to hardware.
> 
> Awkwardly, the MB controls don't implement CDP. To emulate this, the MPAM
> equivalent needs programming twice by the resctrl glue, as resctrl expects
> the bandwidth controls to be applied independently for both data and
> instruction-fetch.
> 
> Tested-by: Gavin Shan <gshan at redhat.com>
> Tested-by: Shaopeng Tan <tan.shaopeng at jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman at google.com>
> CC: Dave Martin <Dave.Martin at arm.com>
> CC: Amit Singh Tomar <amitsinght at marvell.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron at huawei.com>
> Signed-off-by: James Morse <james.morse at arm.com>
> Signed-off-by: Ben Horgan <ben.horgan at arm.com>
> ---
> Changes since rfc:
> Fail cdp initialisation if there is only one partid
> Correct data/code confusion
> 
> Changes since v2:
> Don't include unused header
> 
> Changes since v3:
> Update the per-cpu values and sync to h/w
> ---
>   arch/arm64/include/asm/mpam.h  |   1 +
>   drivers/resctrl/mpam_resctrl.c | 117 +++++++++++++++++++++++++++++++++
>   include/linux/arm_mpam.h       |   2 +
>   3 files changed, 120 insertions(+)
> 
> diff --git a/arch/arm64/include/asm/mpam.h b/arch/arm64/include/asm/mpam.h
> index 05aa71200f61..70d396e7b6da 100644
> --- a/arch/arm64/include/asm/mpam.h
> +++ b/arch/arm64/include/asm/mpam.h
> @@ -4,6 +4,7 @@
>   #ifndef __ASM__MPAM_H
>   #define __ASM__MPAM_H
>   
> +#include <linux/arm_mpam.h>
>   #include <linux/bitfield.h>
>   #include <linux/jump_label.h>
>   #include <linux/percpu.h>
> diff --git a/drivers/resctrl/mpam_resctrl.c b/drivers/resctrl/mpam_resctrl.c
> index cd52ca279651..12017264530a 100644
> --- a/drivers/resctrl/mpam_resctrl.c
> +++ b/drivers/resctrl/mpam_resctrl.c
> @@ -38,6 +38,10 @@ static DEFINE_MUTEX(domain_list_lock);
>   static bool exposed_alloc_capable;
>   static bool exposed_mon_capable;
>   
> +/*
> + * MPAM emulates CDP by setting different PARTID in the I/D fields of MPAM0_EL1.
> + * This applies globally to all traffic the CPU generates.
> + */
>   static bool cdp_enabled;
>   
>   bool resctrl_arch_alloc_capable(void)
> @@ -50,6 +54,72 @@ bool resctrl_arch_mon_capable(void)
>   	return exposed_mon_capable;
>   }
>   
> +bool resctrl_arch_get_cdp_enabled(enum resctrl_res_level rid)
> +{
> +	switch (rid) {
> +	case RDT_RESOURCE_L2:
> +	case RDT_RESOURCE_L3:
> +		return cdp_enabled;
> +	case RDT_RESOURCE_MBA:
> +	default:
> +		/*
> +		 * x86's MBA control doesn't support CDP, so user-space doesn't

s/x86's/ARM's/

Thanks.

-Fenghua

[SNIP]