[PATCH v1 4/6] media: rkisp1-isp: Propagate sink -> source format in YUV passthough

[Isaac Scott]

If we are in bypass mode, we should propagate the sink format of the ISP
to the source format to ensure the pipeline is valid. Ensure the source
pad format of the ISP is configured to the same format as the sink pad.

Signed-off-by: Isaac Scott <isaac.scott at ideasonboard.com>
---
 drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
index 716bd7f3c66d..c457593526c5 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-isp.c
@@ -630,6 +630,11 @@ static void rkisp1_isp_set_src_fmt(struct rkisp1_isp *isp,
 	 */
 	sink_info = rkisp1_mbus_info_get_by_code(sink_fmt->code);
 
+	if (sink_info->pixel_enc == V4L2_PIXEL_ENC_YUV) {
+		format->code = sink_fmt->code;
+		dev_dbg(isp->rkisp1->dev, "ISP sink pad is YUV");
+	}
+
 	src_fmt->code = format->code;
 	src_info = rkisp1_mbus_info_get_by_code(src_fmt->code);
 	if (!src_info || !(src_info->direction & RKISP1_ISP_SD_SRC)) {
-- 
2.43.0