[PATCH net-next v4 3/3] net: stmmac: Add glue layer for Spacemit K3 SoC

[Inochi Amaoto]

On Tue, Feb 03, 2026 at 05:48:00PM +0000, Russell King (Oracle) wrote:
> On Fri, Jan 30, 2026 at 10:27:04AM +0800, Inochi Amaoto wrote:
> > +/* ctrl register bits */
> > +#define CTRL_PHY_INTF_RGMII		BIT(3)
> > +#define CTRL_PHY_INTF_MII		BIT(4)
> > +#define CTRL_WAKE_IRQ_EN		BIT(9)
> > +#define CTRL_PHY_IRQ_EN			BIT(12)
> 
> Thanks for updating these.
> 
> > +static int spacemit_dwmac_update_ifconfig(struct plat_stmmacenet_data *plat_dat,
> > +					  struct stmmac_resources *stmmac_res,
> > +					  struct regmap *apmu,
> > +					  unsigned int ctrl_offset)
> > +{
> > +	unsigned int mask = CTRL_PHY_INTF_MII | CTRL_PHY_INTF_RGMII | CTRL_WAKE_IRQ_EN;
> > +	unsigned int val = 0;
> > +
> > +	switch (plat_dat->phy_interface) {
> > +	case PHY_INTERFACE_MODE_MII:
> > +		val = CTRL_PHY_INTF_MII;
> > +		break;
> > +
> > +	case PHY_INTERFACE_MODE_RMII:
> > +		break;
> > +
> > +	case PHY_INTERFACE_MODE_RGMII:
> > +	case PHY_INTERFACE_MODE_RGMII_ID:
> > +	case PHY_INTERFACE_MODE_RGMII_RXID:
> > +	case PHY_INTERFACE_MODE_RGMII_TXID:
> > +		val = CTRL_PHY_INTF_RGMII;
> > +		break;
> > +
> > +	default:
> > +		return -EOPNOTSUPP;
> > +	}
> > +
> > +	if (stmmac_res->wol_irq >= 0)
> > +		val |= CTRL_WAKE_IRQ_EN;
> > +
> > +	return regmap_update_bits(apmu, ctrl_offset, mask, val);
> 
> I would suggest that this is split into two parts - first, this is
> renamed and reduced to just controlling CTRL_WAKE_IRQ_EN.
> 
> Next, a function hooked into plat_dat->set_phy_intf_sel which sets
> the CTRL_PHY_INTF_RGMII and CTRL_PHY_INTF_MII bits as appropriate.
> Note that this function is passed the dwmac's own phy_intf_sel
> value from common.h which will be PHY_INTF_SEL_GMII_MII,
> PHY_INTF_SEL_RGMII or PHY_INTF_SEL_RMII for you.
> 
> It would also be good to have plat_dat->get_interfaces populated
> using phy_interface_set_rgmii(), and __set_bit(PHY_INTERFACE_MODE_MII)
> and __set_bit(PHY_INTERFACE_MODE_RMII) to indicate to phylink which
> interface modes are permissable.
> 
> Thanks.
> 
> -- 
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Thanks for your detailed guide, I will try to switch to these helper
apis in the next version.

Regards,
Inochi