[PATCH 1/3] arm64: dts: imx8mp-evk: Enable pull select bit for PCIe regulator GPIO (M.2 W_DISABLE1)

[Sherry Sun]

The current pin configuration for MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06
sets the weak pull-up but does not enable the pull select field.
Bit 8 in the IOMUX register must be set in order for the weak pull-up
to actually take effect.

Update the pinctrl setting from 0x40 to 0x140 to enable both the pull
select and the weak pull-up, ensuring the line behaves as expected.

Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 3f9b3fab8ac3..a1269c7a6cc2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -1069,7 +1069,7 @@ MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x40
 
 	pinctrl_pcie0_reg: pcie0reggrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x140
 		>;
 	};
 
-- 
2.37.1