[PATCH v8 00/18] Apply drm_bridge_connector and panel_bridge helper for the Analogix DP driver

[Damon Ding]

Hi Luca,

On 2/3/2026 7:11 PM, Luca Ceresoli wrote:
> Hello Heiko, Damon,
> 
> On Mon Jan 19, 2026 at 5:06 PM CET, Heiko Stübner wrote:
>> Hi Damon,
>>
>> Am Mittwoch, 17. Dezember 2025, 10:33:03 Mitteleuropäische Normalzeit schrieb Damon Ding:
>>> PATCH 1 is to ensure the last bridge declares OP_EDID or OP_MODES or both.
>>> PATCH 2 is a small format optimization for struct analogid_dp_device.
>>> PATCH 3 is to perform mode setting in &drm_bridge_funcs.atomic_enable.
>>> PATCH 4 is to add a new parameter to store the point of next bridge.
>>> PATCH 5 is to make legacy bridge driver more universal.
>>> PATCH 6-11 are preparations for apply drm_bridge_connector helper.
>>> PATCH 12 is to apply the drm_bridge_connector helper.
>>> PATCH 13-15 are to move the panel/bridge parsing to the Analogix side.
>>> PATCH 16 is to attach the next bridge on Analogix side uniformly.
>>> PATCH 17-18 are to apply the panel_bridge helper.
>>
>> On top of all the recent bridge-related commits, this series still works
>> on my rk3588-eDP board - when the display is plugged in on boot.
>>
>> As that is the current state we also had before, this series:
>> Tested-by: Heiko Stuebner <heiko at sntech.de> on rk3588
> 
> I'm appplying patches 1-3 and got a checkpatch warning for each patch:
> 
>    WARNING: Unexpected content after email: 'Heiko Stuebner <heiko at sntech.de> on rk3588', should be: 'Heiko Stuebner <heiko at sntech.de> (on rk3588)'
> 
> I'm fixing it while applying those 3 patches.
> 
> Damon, can you fix that for the remaining patches before sending a new
> iteration?
> 

Yes, will fix in v9.

Best regards,
Damon