回复: [PATCH v6 0/3] Add support for Cix Sky1 resets

[Gary Yang]

Hi Lee

Thanks for your comments

> EXTERNAL EMAIL
> 
> On Tue, 03 Feb 2026, Gary Yang wrote:
> 
> > Patch 1: Add yaml file for Cix Sky1 resets Patch 2: Add driver codes
> > for Cix Sky1 resets Patch 3: Add dts nodes for Cix Sky1 resets
> >
> > v6 changes:
> > - Pass dts build check with below commands:
> > make O=$OUTKNL dt_binding_check
> > make O=$OUTKNL dt_binding_check
> > DT_SCHEMA_FILES=cix,sky1-system-control.yaml
> > make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
> > scripts/checkpatch.pl 000*.patch
> > - refine reset driver
> > - fix dt-bindings style
> >
> > v5 changes:
> > - Pass dts build check with below commands:
> > make O=$OUTKNL dt_binding_check
> > make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
> make
> > O=$OUTKNL dt_binding_check
> > DT_SCHEMA_FILES=cix,sky1-system-controller.yaml
> > make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
> > scripts/checkpatch.pl 000*.patch
> > - refine reset driver
> > - fix dt-bindings style
> >
> > v4 changes:
> > - Pass dts build check with below commands:
> > make O=$OUTKNL dt_binding_check
> > make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
> make
> > O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
> scripts/checkpatch.pl
> > 000*.patch
> > - add syscon
> > - refine reset driver
> > - fix dt-bindings style
> >
> > v3 changes:
> > - Pass dts build check with below commands:
> > make O=$OUTKNL dt_binding_check
> > make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
> make
> > O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
> scripts/checkpatch.pl
> > 000*.patch
> > - remove syscon
> >
> > v2 changes:
> > - Pass dts build check with below commands:
> > make O=$OUTKNL dt_binding_check
> > make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=cix,sky1-rst.yaml
> make
> > O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
> scripts/checkpatch.pl
> > 000*.patch
> > - fix dt-bindings style
> > - refine reset driver
> >
> > Gary Yang (3):
> >   dt-bindings: soc: cix: document the simple-mfd syscon on Sky1 SoC
> >   reset: add Sky1 soc reset support
> >   arm64: dts: cix: add support for cix sky1 resets
> >
> >  .../soc/cix/cix,sky1-system-control.yaml      |  49 +++++
> >  arch/arm64/boot/dts/cix/sky1.dtsi             |  14 ++
> >  drivers/reset/Kconfig                         |   7 +
> >  drivers/reset/Makefile                        |   1 +
> >  drivers/reset/reset-sky1-base.c               | 125 +++++++++++
> >  drivers/reset/reset-sky1-fch.c                |  78 +++++++
> >  drivers/reset/reset-sky1.c                    | 204
> ++++++++++++++++++
> >  drivers/soc/Kconfig                           |   1 +
> >  drivers/soc/Makefile                          |   1 +
> >  drivers/soc/cix/Kconfig                       |  11 +
> >  drivers/soc/cix/Makefile                      |   1 +
> >  drivers/soc/cix/sky1-system-control.c         |  47 ++++
> >  include/dt-bindings/reset/cix,sky1-rst-fch.h  |  42 ++++
> >  include/dt-bindings/reset/cix,sky1-rst.h      | 164 ++++++++++++++
> >  include/linux/reset/sky1.h                    |  18 ++
> 
> This is in my inbox because ...

Sorry, it's my mistakes. Because v5 patch's maintainer list contains your name.
Please ignore this patch. Thanks for your understandings

Best Regards
Gary

> 
> >  15 files changed, 763 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/soc/cix/cix,sky1-system-control.yaml
> >  create mode 100644 drivers/reset/reset-sky1-base.c  create mode
> > 100644 drivers/reset/reset-sky1-fch.c  create mode 100644
> > drivers/reset/reset-sky1.c  create mode 100644 drivers/soc/cix/Kconfig
> > create mode 100644 drivers/soc/cix/Makefile  create mode 100644
> > drivers/soc/cix/sky1-system-control.c
> >  create mode 100644 include/dt-bindings/reset/cix,sky1-rst-fch.h
> >  create mode 100644 include/dt-bindings/reset/cix,sky1-rst.h
> >  create mode 100644 include/linux/reset/sky1.h
> 
> --
> Lee Jones [李琼斯]