[PATCH 02/10] ARM: dts: imx35: rename i2c clock-names to ipg

[Frank Li]

Rename the i2c clock-names from "ipg_per" to "ipg" to match the binding
documentation.

Fix the following CHECK_DTBS warning:
  i2c at 43f80000 (fsl,imx35-i2c): clock-names:0: 'ipg' was expected

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm/boot/dts/nxp/imx/imx35.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
index 1c010a83d5df138562cd086c7b10d34431378add..aed7fe2fd6b93fe70a0abc7213fe0b874afe579a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx35.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx35.dtsi
@@ -79,7 +79,7 @@ i2c1: i2c at 43f80000 {
 				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
 				reg = <0x43f80000 0x4000>;
 				clocks = <&clks 51>;
-				clock-names = "ipg_per";
+				clock-names = "ipg";
 				interrupts = <10>;
 				status = "disabled";
 			};
@@ -90,7 +90,7 @@ i2c3: i2c at 43f84000 {
 				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
 				reg = <0x43f84000 0x4000>;
 				clocks = <&clks 53>;
-				clock-names = "ipg_per";
+				clock-names = "ipg";
 				interrupts = <3>;
 				status = "disabled";
 			};
@@ -119,7 +119,7 @@ i2c2: i2c at 43f98000 {
 				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
 				reg = <0x43f98000 0x4000>;
 				clocks = <&clks 52>;
-				clock-names = "ipg_per";
+				clock-names = "ipg";
 				interrupts = <4>;
 				status = "disabled";
 			};

-- 
2.34.1