[PATCH V2 3/3] net: ethernet: ti: Remove IS_ERR_OR_NULL checks for knav_dma_open_channel

[Nishanth Menon]

knav_dma_open_channel now only returns NULL on failure instead of error
pointers. Replace IS_ERR_OR_NULL checks with simple NULL checks.

Suggested-by: Simon Horman <horms at kernel.org>
Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes in V2:
* renewed version
* Dropped the fixes since code refactoring was involved.

V1: https://lore.kernel.org/all/20250926150853.2907028-1-nm@ti.com/

 drivers/net/ethernet/ti/netcp_core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
index 2f9d26c791e3..5ee13db568f0 100644
--- a/drivers/net/ethernet/ti/netcp_core.c
+++ b/drivers/net/ethernet/ti/netcp_core.c
@@ -1338,7 +1338,7 @@ int netcp_txpipe_open(struct netcp_tx_pipe *tx_pipe)
 
 	tx_pipe->dma_channel = knav_dma_open_channel(dev,
 				tx_pipe->dma_chan_name, &config);
-	if (IS_ERR_OR_NULL(tx_pipe->dma_channel)) {
+	if (!tx_pipe->dma_channel) {
 		dev_err(dev, "failed opening tx chan(%s)\n",
 			tx_pipe->dma_chan_name);
 		ret = -EINVAL;
@@ -1359,7 +1359,7 @@ int netcp_txpipe_open(struct netcp_tx_pipe *tx_pipe)
 	return 0;
 
 err:
-	if (!IS_ERR_OR_NULL(tx_pipe->dma_channel))
+	if (tx_pipe->dma_channel)
 		knav_dma_close_channel(tx_pipe->dma_channel);
 	tx_pipe->dma_channel = NULL;
 	return ret;
@@ -1678,7 +1678,7 @@ static int netcp_setup_navigator_resources(struct net_device *ndev)
 
 	netcp->rx_channel = knav_dma_open_channel(netcp->netcp_device->device,
 					netcp->dma_chan_name, &config);
-	if (IS_ERR_OR_NULL(netcp->rx_channel)) {
+	if (!netcp->rx_channel) {
 		dev_err(netcp->ndev_dev, "failed opening rx chan(%s\n",
 			netcp->dma_chan_name);
 		ret = -EINVAL;
-- 
2.47.0