[PATCH RFC net-next 2/6] net: phy: add phy_may_wakeup()

[Russell King (Oracle)]

Add phy_may_wakeup() which uses the driver model's device_may_wakeup()
when the PHY driver has marked the device as wakeup capable in the
driver model, otherwise use phy_drv_wol_enabled().

Replace the sites that used to call phy_drv_wol_enabled() with this
as checking the driver model will be more efficient than checking the
WoL state.

Export phy_may_wakeup() so that phylink can use it.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/phy/phy_device.c | 14 ++++++++++++--
 include/linux/phy.h          |  9 +++++++++
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 01269b865f5e..4c8df9f02eb3 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -251,6 +251,16 @@ static bool phy_drv_wol_enabled(struct phy_device *phydev)
 	return wol.wolopts != 0;
 }
 
+bool phy_may_wakeup(struct phy_device *phydev)
+{
+	/* If the PHY is using driver-model based wakeup, use that state. */
+	if (phy_can_wakeup(phydev))
+		return device_may_wakeup(&phydev->mdio.dev);
+
+	return phy_drv_wol_enabled(phydev);
+}
+EXPORT_SYMBOL_GPL(phy_may_wakeup);
+
 static void phy_link_change(struct phy_device *phydev, bool up)
 {
 	struct net_device *netdev = phydev->attached_dev;
@@ -302,7 +312,7 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 	/* If the PHY on the mido bus is not attached but has WOL enabled
 	 * we cannot suspend the PHY.
 	 */
-	if (!netdev && phy_drv_wol_enabled(phydev))
+	if (!netdev && phy_may_wakeup(phydev))
 		return false;
 
 	/* PHY not attached? May suspend if the PHY has not already been
@@ -1909,7 +1919,7 @@ int phy_suspend(struct phy_device *phydev)
 	if (phydev->suspended || !phydrv)
 		return 0;
 
-	phydev->wol_enabled = phy_drv_wol_enabled(phydev) ||
+	phydev->wol_enabled = phy_may_wakeup(phydev) ||
 			      (netdev && netdev->ethtool->wol_enabled);
 	/* If the device has WOL enabled, we cannot suspend the PHY */
 	if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND))
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 7f6758198948..2292ee9a93c0 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1391,6 +1391,15 @@ static inline bool phy_can_wakeup(struct phy_device *phydev)
 	return device_can_wakeup(&phydev->mdio.dev);
 }
 
+/**
+ * phy_may_wakeup() - indicate whether PHY has driver model wakeup is enabled
+ * @phydev: The phy_device struct
+ *
+ * Returns: true/false depending on the PHY driver's device_set_wakeup_enabled()
+ * setting.
+ */
+bool phy_may_wakeup(struct phy_device *phydev);
+
 void phy_resolve_aneg_pause(struct phy_device *phydev);
 void phy_resolve_aneg_linkmode(struct phy_device *phydev);
 
-- 
2.47.3