[PATCH v2 2/7] arm64: dts: ti: k3-am62: Define possible system states

[Kendall Willis]

On 11:15-20250812, Markus Schneider-Pargmann wrote:
> Add the system states that are available on am62 SoCs.
>

nit: Change "am62 SoCs" to "TI AM62x SoCs"

Additionally, it would be nice to add what sleep states are supported in
the commit message.

These comments also go for the other two patches that are titled
"Define possible system states".

Best,
Kendall Willis

> Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
> index 59f6dff552ed40e4ac0f9c7077aa25d68d3b5283..b08b7062060ca12ecae83917a831ee779f1a288f 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
> @@ -46,6 +46,28 @@ pmu: pmu {
>  		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>  	};
>  
> +	system-idle-states {
> +		system_partial_io: system-partial-io {
> +			compatible = "system-idle-state";
> +			idle-state-name = "off-wake";
> +		};
> +
> +		system_deep_sleep: system-deep-sleep {
> +			compatible = "system-idle-state";
> +			idle-state-name = "mem";
> +		};
> +
> +		system_mcu_only: system-mcu-only {
> +			compatible = "system-idle-state";
> +			idle-state-name = "mem-mcu-active";
> +		};
> +
> +		system_standby: system-standby {
> +			compatible = "system-idle-state";
> +			idle-state-name = "standby";
> +		};
> +	};
> +
>  	cbass_main: bus at f0000 {
>  		bootph-all;
>  		compatible = "simple-bus";
> 
> -- 
> 2.50.1
>