[PATCH v7 2/2] ethernet: eswin: Add eic7700 ethernet driver

[Russell King (Oracle)]

On Tue, Sep 23, 2025 at 11:06:08AM +0800, 韦尚娟 wrote:
> In the current eic7700_dwmac glue driver, the regmap_read()/write()
> operations(for phy_ctrl1, axi_lp_ctrl1, and the RX/TX delay registers))are 
> performed directly in the probe() function. Would it be cleaner to move these
> register configurations into the init() callback instead, so that they are
> also reapplied during resume()?

This is a question I can't answer definitively as I don't know what
happens during a suspend on your hardware, and thus which registers
are lost / reset by the time the system resumes. So I can only give
the obvious guidance.

If the settings in the delay registers are lost over a suspend/resume
then they need to be re-initialised after resume.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!