[PATCH] arm64: dts: cix: add DT nodes for SPI

[Peter Chen]

On 25-09-19 09:31:18, Jun Guo wrote:
> Add the device tree node for the spi controller of the CIX SKY1 SoC.
> 
> Signed-off-by: Jun Guo <jun.guo at cixtech.com>

Applied, thanks.

Peter
> ---
>  arch/arm64/boot/dts/cix/sky1.dtsi | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
> index 2fb2c99c0796..ea324336bf34 100644
> --- a/arch/arm64/boot/dts/cix/sky1.dtsi
> +++ b/arch/arm64/boot/dts/cix/sky1.dtsi
> @@ -264,6 +264,26 @@ i2c7: i2c at 4080000 {
>  			status = "disabled";
>  		};
>  
> +		spi0: spi at 4090000 {
> +			compatible = "cdns,spi-r1p6";
> +			reg = <0x0 0x04090000 0x0 0x10000>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_SPI0_APB>,
> +				 <&scmi_clk CLK_TREE_FCH_SPI0_APB>;
> +			clock-names = "ref_clk", "pclk";
> +			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
> +			status = "disabled";
> +		};
> +
> +		spi1: spi at 40a0000 {
> +			compatible = "cdns,spi-r1p6";
> +			reg = <0x0 0x040a0000 0x0 0x10000>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_SPI1_APB>,
> +				 <&scmi_clk CLK_TREE_FCH_SPI1_APB>;
> +			clock-names = "ref_clk", "pclk";
> +			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>;
> +			status = "disabled";
> +		};
> +
>  		uart0: serial at 40b0000 {
>  			compatible = "arm,pl011", "arm,primecell";
>  			reg = <0x0 0x040b0000 0x0 0x1000>;
> -- 
> 2.34.1
> 

-- 

Best regards,
Peter