[PATCH v2 5/5] media: nxp: imx8-isi: Add ISI support for i.MX91

[Laurent Pinchart]

Hi Guoniu,

Thank you for the patch.

On Fri, Sep 05, 2025 at 02:56:02PM +0800, Guoniu Zhou wrote:
> The ISI module on i.MX91 implements only one channel and one parallel
> camera input. As no input source selection is required, gasket ops are
> unnecessary.
> 
> Reviewed-by: Frank Li <Frank.Li at nxp.com>
> Signed-off-by: Guoniu Zhou <guoniu.zhou at nxp.com>
> ---
>  drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c | 12 ++++++++++++
>  drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h |  1 +
>  2 files changed, 13 insertions(+)
> 
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> index 0155c75983f02f33f7f0669e73188222ebb5e816..c3d411ddf492eb27b372763ce5d344a90c6ec524 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> @@ -347,6 +347,17 @@ static const struct mxc_isi_plat_data mxc_imx8ulp_data = {
>  	.has_36bit_dma		= false,
>  };
>  
> +static const struct mxc_isi_plat_data mxc_imx91_data = {
> +	.model			= MXC_ISI_IMX91,
> +	.num_ports		= 1,
> +	.num_channels		= 1,
> +	.reg_offset		= 0,
> +	.ier_reg		= &mxc_imx8_isi_ier_v2,
> +	.set_thd		= &mxc_imx8_isi_thd_v1,
> +	.buf_active_reverse	= true,
> +	.has_36bit_dma		= false,
> +};
> +
>  static const struct mxc_isi_plat_data mxc_imx93_data = {
>  	.model			= MXC_ISI_IMX93,
>  	.num_ports		= 1,
> @@ -547,6 +558,7 @@ static const struct of_device_id mxc_isi_of_match[] = {
>  	{ .compatible = "fsl,imx8qm-isi", .data = &mxc_imx8qm_data },
>  	{ .compatible = "fsl,imx8qxp-isi", .data = &mxc_imx8qxp_data },
>  	{ .compatible = "fsl,imx8ulp-isi", .data = &mxc_imx8ulp_data },
> +	{ .compatible = "fsl,imx91-isi", .data = &mxc_imx91_data },
>  	{ .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data },
>  	{ /* sentinel */ },
>  };
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> index e84af5127e4e7938e55e31b7063bee5e2cd4cb11..3cbd35305af0f8026c4f76b5eb5d0864f8e36dc3 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> @@ -160,6 +160,7 @@ enum model {
>  	MXC_ISI_IMX8QM,
>  	MXC_ISI_IMX8QXP,
>  	MXC_ISI_IMX8ULP,
> +	MXC_ISI_IMX91,
>  	MXC_ISI_IMX93,
>  };

The model field is unused, should we drop it ? That's a candidate for a
separate patch, for this patch

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

>  

-- 
Regards,

Laurent Pinchart