(subset) [PATCH v2 0/7] arm64: allwinner: a523: Enable MCU PRCM and NPU

Chen-Yu Tsai wens at csie.org
Fri Sep 12 23:16:12 PDT 2025


On Fri, 12 Sep 2025 01:47:03 +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens at csie.org>
> 
> Hi folks,
> 
> This is v2 of my A523 MCU PRCM and NPU support series.
> 
> Changes since v1:
> - Dropped dual divider clock rate read-back fix that is already merged
> - DT binding
>   - Moved "r-ahb" clock to the end of the list and added "r-apb0" clock
> - Add NPU clk
>   - Move .num to after list of clks
> - MCU CCU clk driver
>   - Added comment for "fixed" dividers in audio PLL clock
>   - Corrected variable names for audio PLL divider clocks
>   - Added comment for the reversed order of some of the DSP clock's
>     parents when compared to the manual
>   - Added comments for clocks and resets only found in the BSP driver
>   - Corrected register offset for i2s3-asrc and bus-mcu-pwm0 clocks
>   - Made "r-ahb" and new "r-apb0" external bus clocks the parents of the
>     bus gate clocks, with comments if guessed which one applies
>   - Moved .num_clks to after the list of clocks, making it obvious that
>     the value needs to be added if more clocks are added to the list
> - MCU CCU DT node
>   - Enlarged MCU PRCM register range to 0x200
>   - Moved "r-ahb" clock to the end of the list and added "r-apb0" clock
> - Link to v1
>   https://lore.kernel.org/all/20250830170901.1996227-1-wens@kernel.org/
> 
> [...]

Applied to sunxi/dt-for-6.18 in local tree, thanks!

[6/7] arm64: dts: allwinner: a523: Add MCU PRCM CCU node
      commit: edd63e54e516b54c0b7071463d6e839445efab68
[7/7] arm64: dts: allwinner: a523: Add NPU device node
      commit: a1845487afd06899502714a3500b60f815d98203

Best regards,
-- 
Chen-Yu Tsai <wens at csie.org>




More information about the linux-arm-kernel mailing list