[PATCH v2 1/4] arm64: dts: marvell: cn913x-solidrun: fix sata ports status

[Josua Mayer]

Commit "arm64: dts: marvell: only enable complete sata nodes" changed
armada-cp11x.dtsi disabling all sata ports status by default.

The author missed some dts which relied on the dtsi enabling all ports,
and just disabled unused ones instead.

Update dts for SolidRun cn913x based boards to enable the available
ports, rather than disabling the unvavailable one.

Further according to dt bindings the serdes phys are to be specified in
the port node, not the controller node.
Move those phys properties accordingly in clearfog base/pro/solidwan.

Fixes: 30023876aef4 ("arm64: dts: marvell: only enable complete sata nodes")
Cc: <stable at vger.kernel.org>
Signed-off-by: Josua Mayer <josua at solid-run.com>
---
 arch/arm64/boot/dts/marvell/cn9130-cf.dtsi         | 7 ++++---
 arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts | 6 ++++--
 arch/arm64/boot/dts/marvell/cn9132-clearfog.dts    | 6 ++----
 3 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
index ad0ab34b66028c53b8a18b3e8ee0c0aec869759f..bd42bfbe408bbe2a4d58dbd40204bcfb3c126312 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
@@ -152,11 +152,12 @@ expander0_pins: cp0-expander0-pins {
 
 /* SRDS #0 - SATA on M.2 connector */
 &cp0_sata0 {
-	phys = <&cp0_comphy0 1>;
 	status = "okay";
 
-	/* only port 1 is available */
-	/delete-node/ sata-port at 0;
+	sata-port at 1 {
+		phys = <&cp0_comphy0 1>;
+		status = "okay";
+	};
 };
 
 /* microSD */
diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
index 47234d0858dd2195bb1485f25768ad3c757b7ac2..338853d3b179bb5cb742e975bb830fdb9d62d4cc 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
+++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
@@ -563,11 +563,13 @@ &cp1_rtc {
 
 /* SRDS #1 - SATA on M.2 (J44) */
 &cp1_sata0 {
-	phys = <&cp1_comphy1 0>;
 	status = "okay";
 
 	/* only port 0 is available */
-	/delete-node/ sata-port at 1;
+	sata-port at 0 {
+		phys = <&cp1_comphy1 0>;
+		status = "okay";
+	};
 };
 
 &cp1_syscon0 {
diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
index 0f53745a6fa0d8cbd3ab9cdc28a972ed748c275f..115c55d73786e2b9265e1caa4c62ee26f498fb41 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
+++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
@@ -512,10 +512,9 @@ &cp1_sata0 {
 	status = "okay";
 
 	/* only port 1 is available */
-	/delete-node/ sata-port at 0;
-
 	sata-port at 1 {
 		phys = <&cp1_comphy3 1>;
+		status = "okay";
 	};
 };
 
@@ -631,9 +630,8 @@ &cp2_sata0 {
 	status = "okay";
 
 	/* only port 1 is available */
-	/delete-node/ sata-port at 0;
-
 	sata-port at 1 {
+		status = "okay";
 		phys = <&cp2_comphy3 1>;
 	};
 };

-- 
2.51.0