[PATCH 3/3] arm64: dts: rockchip: Enable PCIe controller on Radxa E20C

[Yao Zi]

On Tue, Sep 09, 2025 at 09:00:09PM +0800, Chukun Pan wrote:
> Hi,
> 
> > +&pcie {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pciem1_pins>, <&pcie_reset_g>;
> 
> The pciem1_pins contains PCIE20_PERSTn_M1 (GPIO1_A2)
> This will cause conflicts, "pinctrl-0 = <&pciem1_pins>" is enough.
> 
> [    0.115608] rockchip-pinctrl pinctrl: not freeing pin 34 (gpio1-2) as part of deactivating group pciem1-pins - it is already used for some other setting
> [    0.191042] rockchip-pinctrl pinctrl: pin gpio1-2 already requeste by pll_gpll; cannot claim for 140000000.pcie
> [    0.191949] rockchip-pinctrl pinctrl: error -EINVAL: pin-34 (140000000.pcie)
> [    0.192570] rockchip-pinctrl pinctrl: error -EINVAL: could not request pin 34 (gpio1-2) from group pciem1-pins on device rockchip-pinctrl
> 
> > +	reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
> 
> Missing supply: "vpcie3v3-supply = <&vcc_3v3>;"
> 
> > +	status = "okay";
> > +};
> > +

Will fix them in v2, thanks.

> Thanks,
> Chukun

Best regards,
Yao Zi