[PATCH v6 01/20] bus: firewall: move stm32_firewall header file in include folder

[Gatien CHEVALLIER]

On 9/10/25 09:47, Clément Le Goffic wrote:
> On 09/09/2025 14:25, Gatien CHEVALLIER wrote:
>>
>>
>> On 9/9/25 12:12, Clément Le Goffic wrote:
>>> From: Clément Le Goffic <clement.legoffic at foss.st.com>
>>>
>>> Other driver than rifsc and etzpc can implement firewall ops, such as
>>> rcc.
>>> In order for them to have access to the ops and type of this framework,
>>> we need to get the `stm32_firewall.h` file in the include/ folder.
>>>
>>> Signed-off-by: Clément Le Goffic <clement.legoffic at foss.st.com>
>>> Signed-off-by: Clément Le Goffic <legoffic.clement at gmail.com>
>>> ---
>>>   drivers/bus/stm32_etzpc.c                       | 3 +--
>>>   drivers/bus/stm32_firewall.c                    | 3 +--
>>>   drivers/bus/stm32_rifsc.c                       | 3 +--
>>>   {drivers => include/linux}/bus/stm32_firewall.h | 0
>>>   4 files changed, 3 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/bus/stm32_etzpc.c b/drivers/bus/stm32_etzpc.c
>>> index 7fc0f16960be..4918a14e507e 100644
>>> --- a/drivers/bus/stm32_etzpc.c
>>> +++ b/drivers/bus/stm32_etzpc.c
>>> @@ -5,6 +5,7 @@
>>>   #include <linux/bitfield.h>
>>>   #include <linux/bits.h>
>>> +#include <linux/bus/stm32_firewall.h>
>>>   #include <linux/device.h>
>>>   #include <linux/err.h>
>>>   #include <linux/init.h>
>>> @@ -16,8 +17,6 @@
>>>   #include <linux/platform_device.h>
>>>   #include <linux/types.h>
>>> -#include "stm32_firewall.h"
>>> -
>>>   /*
>>>    * ETZPC registers
>>>    */
>>> diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
>>> index 2fc9761dadec..ef4988054b44 100644
>>> --- a/drivers/bus/stm32_firewall.c
>>> +++ b/drivers/bus/stm32_firewall.c
>>> @@ -5,6 +5,7 @@
>>>   #include <linux/bitfield.h>
>>>   #include <linux/bits.h>
>>> +#include <linux/bus/stm32_firewall.h>
>>>   #include <linux/bus/stm32_firewall_device.h>
>>>   #include <linux/device.h>
>>>   #include <linux/err.h>
>>> @@ -18,8 +19,6 @@
>>>   #include <linux/types.h>
>>>   #include <linux/slab.h>
>>> -#include "stm32_firewall.h"
>>> -
>>>   /* Corresponds to STM32_FIREWALL_MAX_EXTRA_ARGS + firewall ID */
>>>   #define STM32_FIREWALL_MAX_ARGS (STM32_FIREWALL_MAX_EXTRA_ARGS + 1)
>>> diff --git a/drivers/bus/stm32_rifsc.c b/drivers/bus/stm32_rifsc.c
>>> index 4cf1b60014b7..643ddd0a5f54 100644
>>> --- a/drivers/bus/stm32_rifsc.c
>>> +++ b/drivers/bus/stm32_rifsc.c
>>> @@ -5,6 +5,7 @@
>>>   #include <linux/bitfield.h>
>>>   #include <linux/bits.h>
>>> +#include <linux/bus/stm32_firewall.h>
>>>   #include <linux/device.h>
>>>   #include <linux/err.h>
>>>   #include <linux/init.h>
>>> @@ -16,8 +17,6 @@
>>>   #include <linux/platform_device.h>
>>>   #include <linux/types.h>
>>> -#include "stm32_firewall.h"
>>> -
>>>   /*
>>>    * RIFSC offset register
>>>    */
>>> diff --git a/drivers/bus/stm32_firewall.h b/include/linux/bus/ 
>>> stm32_firewall.h
>>> similarity index 100%
>>> rename from drivers/bus/stm32_firewall.h
>>> rename to include/linux/bus/stm32_firewall.h
>>>
> 
> Hi Gatien
> 
>> As the firewall header is moved to a dedicated firewall directory,
> 
> I don't move it to a dedicated firewall directory just to the "bus" 
> directory where the "stm32_firewall_device.h" header file is already 
> located.
> 

Yes, my bad, I mixed my words there.

>> maybe it would be coherent to create the same kind of directory
>> for the sources as non-buses drivers use it. I can test it on my
>> side if you're willing to make the change.
> 
> Do you mean create an include/linux/bus/firewall/ directory ?
> 

Rather include/linux/firewall/(stm32/). and a drivers/firewall/(stm32/)
directory for the firewall files would be great. If that's not too much
of a burden.

Cheers,
Gatien

> Best regards,
> Clément