[PATCH] arm64: dts: cix: add DT nodes for all I2C and I3C ports for sky1

[Peter Chen]

On 25-09-03 16:47:13, Jun Guo wrote:
> From: Hongliang Yang <hongliang.yang at cixtech.com>
> 
> The CIX SKY1 SoC supports the integration of 8 I2C bus controllers and
> 2 I3C bus controllers.
> 
> Signed-off-by: Hongliang Yang <hongliang.yang at cixtech.com>
> Signed-off-by: Jun Guo <jun.guo at cixtech.com>

Applied, Thanks.

Peter
> ---
>  arch/arm64/boot/dts/cix/sky1.dtsi | 100 ++++++++++++++++++++++++++++++
>  1 file changed, 100 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
> index 7dfe7677e649..2fb2c99c0796 100644
> --- a/arch/arm64/boot/dts/cix/sky1.dtsi
> +++ b/arch/arm64/boot/dts/cix/sky1.dtsi
> @@ -192,6 +192,78 @@ soc at 0 {
>  		#address-cells = <2>;
>  		#size-cells = <2>;
>  
> +		i2c0: i2c at 4010000 {
> +			compatible = "cdns,i2c-r1p14";
> +			reg = <0x0 0x04010000 0x0 0x10000>;
> +			clock-frequency = <400000>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_I2C0_APB>;
> +			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH 0>;
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c at 4020000 {
> +			compatible = "cdns,i2c-r1p14";
> +			reg = <0x0 0x04020000 0x0 0x10000>;
> +			clock-frequency = <400000>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_I2C1_APB>;
> +			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH 0>;
> +			status = "disabled";
> +		};
> +
> +		i2c2: i2c at 4030000 {
> +			compatible = "cdns,i2c-r1p14";
> +			reg = <0x0 0x04030000 0x0 0x10000>;
> +			clock-frequency = <400000>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_I2C2_APB>;
> +			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH 0>;
> +			status = "disabled";
> +		};
> +
> +		i2c3: i2c at 4040000 {
> +			compatible = "cdns,i2c-r1p14";
> +			reg = <0x0 0x04040000 0x0 0x10000>;
> +			clock-frequency = <400000>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_I2C3_APB>;
> +			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
> +			status = "disabled";
> +		};
> +
> +		i2c4: i2c at 4050000 {
> +			compatible = "cdns,i2c-r1p14";
> +			reg = <0x0 0x04050000 0x0 0x10000>;
> +			clock-frequency = <400000>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_I2C4_APB>;
> +			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH 0>;
> +			status = "disabled";
> +		};
> +
> +		i2c5: i2c at 4060000 {
> +			compatible = "cdns,i2c-r1p14";
> +			reg = <0x0 0x04060000 0x0 0x10000>;
> +			clock-frequency = <400000>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_I2C5_APB>;
> +			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH 0>;
> +			status = "disabled";
> +		};
> +
> +		i2c6: i2c at 4070000 {
> +			compatible = "cdns,i2c-r1p14";
> +			reg = <0x0 0x04070000 0x0 0x10000>;
> +			clock-frequency = <400000>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_I2C6_APB>;
> +			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH 0>;
> +			status = "disabled";
> +		};
> +
> +		i2c7: i2c at 4080000 {
> +			compatible = "cdns,i2c-r1p14";
> +			reg = <0x0 0x04080000 0x0 0x10000>;
> +			clock-frequency = <400000>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_I2C7_APB>;
> +			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>;
> +			status = "disabled";
> +		};
> +
>  		uart0: serial at 40b0000 {
>  			compatible = "arm,pl011", "arm,primecell";
>  			reg = <0x0 0x040b0000 0x0 0x1000>;
> @@ -228,6 +300,34 @@ uart3: serial at 40e0000 {
>  			status = "disabled";
>  		};
>  
> +		i3c0: i3c at 40f0000 {
> +			compatible = "cdns,i3c-master";
> +			reg = <0x0 0x040f0000 0x0 0x10000>;
> +			#address-cells = <3>;
> +			#size-cells = <0>;
> +			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_I3C0_APB>,
> +				 <&scmi_clk CLK_TREE_FCH_I3C0_FUNC>;
> +			clock-names = "pclk", "sysclk";
> +			i3c-scl-hz = <400000>;
> +			i2c-scl-hz = <100000>;
> +			status = "disabled";
> +		};
> +
> +		i3c1: i3c at 4100000 {
> +			compatible = "cdns,i3c-master";
> +			reg = <0x0 0x04100000 0x0 0x10000>;
> +			#address-cells = <3>;
> +			#size-cells = <0>;
> +			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&scmi_clk CLK_TREE_FCH_I3C1_APB>,
> +				 <&scmi_clk CLK_TREE_FCH_I3C1_FUNC>;
> +			clock-names = "pclk", "sysclk";
> +			i3c-scl-hz = <400000>;
> +			i2c-scl-hz = <100000>;
> +			status = "disabled";
> +		};
> +
>  		mbox_ap2se: mailbox at 5060000 {
>  			compatible = "cix,sky1-mbox";
>  			reg = <0x0 0x05060000 0x0 0x10000>;
> -- 
> 2.34.1
> 

-- 

Best regards,
Peter