[GIT PULL 2/2] arm64: dts: samsung: dts for v6.18

[Krzysztof Kozlowski]

The following changes since commit 8f5ae30d69d7543eee0d70083daf4de8fe15d585:

  Linux 6.17-rc1 (2025-08-10 19:41:16 +0300)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git tags/samsung-dt64-6.18

for you to fetch changes up to 44b0a8e433aaad8aac51593a052f043aeb9a18d1:

  arm64: dts: exynos990: Enable PERIC0 and PERIC1 clock controllers (2025-09-07 11:13:06 +0200)

----------------------------------------------------------------
Samsung DTS ARM64 changes for v6.18

1. Exynos850 e850 board: Enable Ethernet.

2. Exynos990: Enable watchdog and USB, add more clock controllers.

3. Exynos2200: Switch to 32-bit address space for blocks, because all
   peripherals fit there.  Add remaining serial engine (USI) nodes
   (serial, I2C).

4. New Artpec ARTPEC-8 SoC with board. That's a design from Samsung,
   sharing all basic blocks with other Samsung SoCs (busses, clock
   controllers, pin controllers, PCIe, USB) and having media/video
   related blocks from Axis.

   Only basic support is added here: few clock controllers, pin
   controller and UART.

5. Several cleanups.

----------------------------------------------------------------
Denzeel Oliva (1):
      arm64: dts: exynos990: Enable PERIC0 and PERIC1 clock controllers

Igor Belwon (5):
      arm64: dts: exynos990: Enable watchdog timer
      arm64: dts: exynos990: Add USB nodes
      arm64: dts: exynos990-x1s-common: Enable USB
      arm64: dts: exynos990-c1s: Enable USB
      arm64: dts: exynos990-r8s: Enable USB

Ivaylo Ivanov (4):
      arm64: dts: exynos2200: fix typo in hsi2c23 bus pins label
      arm64: dts: exynos2200: use 32-bit address space for /soc
      arm64: dts: exynos2200: increase the size of all syscons
      arm64: dts: exynos2200: define all usi nodes

Krzysztof Kozlowski (5):
      arm64: dts: exynos5433: Add default GIC address cells
      arm64: dts: google: gs101: Add default GIC address cells
      arm64: dts: fsd: Add default GIC address cells
      arm64: dts: exynos2200: Add default GIC address cells
      arm64: dts: exynos8895: Minor whitespace cleanup

Ravi Patel (1):
      dt-bindings: arm: Convert Axis board/soc bindings to json-schema

Sam Protsenko (1):
      arm64: dts: exynos: Add Ethernet node for E850-96 board

SeonGu Kang (1):
      arm64: dts: axis: Add ARTPEC-8 Grizzly dts support

SungMin Park (2):
      dt-bindings: arm: axis: Add ARTPEC-8 grizzly board
      arm64: dts: exynos: axis: Add initial ARTPEC-8 SoC support

 Documentation/devicetree/bindings/arm/axis.txt     |   13 -
 Documentation/devicetree/bindings/arm/axis.yaml    |   36 +
 MAINTAINERS                                        |   12 +
 arch/arm64/Kconfig.platforms                       |    7 +
 arch/arm64/boot/dts/exynos/Makefile                |    1 +
 arch/arm64/boot/dts/exynos/axis/Makefile           |    4 +
 arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h   |   36 +
 .../arm64/boot/dts/exynos/axis/artpec8-grizzly.dts |   35 +
 .../boot/dts/exynos/axis/artpec8-pinctrl.dtsi      |  120 ++
 arch/arm64/boot/dts/exynos/axis/artpec8.dtsi       |  244 ++++
 arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi |    2 +-
 arch/arm64/boot/dts/exynos/exynos2200.dtsi         | 1434 +++++++++++++++++++-
 arch/arm64/boot/dts/exynos/exynos5433.dtsi         |    1 +
 arch/arm64/boot/dts/exynos/exynos850-e850-96.dts   |   15 +
 arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi |    2 +-
 arch/arm64/boot/dts/exynos/exynos990-c1s.dts       |   16 +
 arch/arm64/boot/dts/exynos/exynos990-r8s.dts       |   16 +
 .../boot/dts/exynos/exynos990-x1s-common.dtsi      |   16 +
 arch/arm64/boot/dts/exynos/exynos990.dtsi          |   77 ++
 arch/arm64/boot/dts/exynos/google/gs101.dtsi       |    1 +
 arch/arm64/boot/dts/tesla/fsd.dtsi                 |    1 +
 21 files changed, 2038 insertions(+), 51 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/axis.txt
 create mode 100644 Documentation/devicetree/bindings/arm/axis.yaml
 create mode 100644 arch/arm64/boot/dts/exynos/axis/Makefile
 create mode 100644 arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
 create mode 100644 arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
 create mode 100644 arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/axis/artpec8.dtsi