[PATCH] clk: at91: clk-master: Add check for divide by 3

[Nicolas Ferre]

On 08/09/2025 at 22:07, Ryan.Wanner at microchip.com wrote:
> From: Ryan Wanner <Ryan.Wanner at microchip.com>
> 
> A potential divider for the master clock is div/3. The register
> configuration for div/3 is MASTER_PRES_MAX. The current bit shifting
> method does not work for this case. Checking for MASTER_PRES_MAX will
> ensure the correct decimal value is stored in the system.
> 
> Signed-off-by: Ryan Wanner <Ryan.Wanner at microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre at microchip.com>

Thanks Ryan, regards,
   Nicolas

> ---
>   drivers/clk/at91/clk-master.c | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
> index 7a544e429d34..d5ea2069ec83 100644
> --- a/drivers/clk/at91/clk-master.c
> +++ b/drivers/clk/at91/clk-master.c
> @@ -580,6 +580,9 @@ clk_sama7g5_master_recalc_rate(struct clk_hw *hw,
>   {
>   	struct clk_master *master = to_clk_master(hw);
>   
> +	if (master->div == MASTER_PRES_MAX)
> +		return DIV_ROUND_CLOSEST_ULL(parent_rate, 3);
> +
>   	return DIV_ROUND_CLOSEST_ULL(parent_rate, (1 << master->div));
>   }
>